cancel
Showing results for 
Search instead for 
Did you mean: 
basheer46
New member
1 0 0 0
Message 1 of 2
162
Flag Post

every time i open my laptop, i have to manually connect wifi

HP Recommended
pavilion
Microsoft Windows 10 (32-bit)

Wi-Fi not getting connected automatically

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,619 4,010
Message 2 of 2
Flag Post
HP Recommended

@basheer46 Peace be unto you!

Here's a few steps that should help resolve this issue once and for all:


Reset IP/ TCP

  1. Press and hold the button “Windows” and the button “X”.
  2. From the menu that shows up, you will need to left click or tap on the “Command Prompt (admin)” icon.
  3. Now that you have the command prompt with administrative rights in front of the screen you will need to write the following command: “netsh winsock reset catalog” without the quotes.
  4. Press the “Enter” button on the keyboard.
  5. Write the following command: “netsh int ip reset reset.log hit” without the quotes.
  6. Press the “Enter” button on the keyboard.
  7. Now you will need to restart your Windows 10 operating system.
  8. Check and see if you still cannot connect to your wireless network.

Set WLAN Autoconfig to Automatic

  1. Left click or tap on the “Start” button.
  2. In the Start window you need to write the following: “services.msc” without the quotes.
  3. When the search is finished, left click or tap on the “services.msc” icon that pops up.
  4. Now you have a “Services” window in front of the screen.
  5. Look on the right side panel in this window for “WLAN Autoconfig”
  6. Right click or hold tap on the “WLAN Autoconfig” feature.
  7. Left click or tap on the “Properties” feature for the “WLAN Autoconfig” option.
  8. Left click or tap on the “General” tab situated in the upper side of the “Properties” window.
  9. On the right from the “Startup type”, you will need to left click on the drop-down menu and select “Automatic” feature.
  10. Left click or tap on the “Start” button in this window.
  11. Left click or tap on the “Apply” button.
  12. Left click or tap on the “OK” button.
  13. Close all the windows you opened so far and reboot your Windows 8.1 or Windows 10 device.
  14. Check to see if you have your wireless up and running again.

P.S: Welcome to HP Community 😉

 

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don't get back to us, first! 

That said, If the information I've provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That'll help us, and others see that we've got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation