cancel
Showing results for 
Search instead for 
Did you mean: 
Anandvardhan
New member
1 0 0 0
Message 1 of 2
114
Flag Post

how can i download a wifi driver for windows 10 for my notebook?

HP Recommended
Example: Pavilion g4 Notebook
Microsoft Windows 10 (32-bit)

when i try to connect through mobile hotspot it shows ..you aren't connected to any networks, after performing troubleshoot it says that ..plug an ethernet cable into this network...plz help

1 REPLY 1
Riddle_Decipher
HP Support Agent
HP Support Agent
31,166 31,117 2,618 3,995
Message 2 of 2
Flag Post
HP Recommended

@Anandvardhan Is this an issue limited to using Hotspot? or does it not connect to any wireless network? If it's the latter, 

I request you to check in the device manager if the wifi card drivers are present:

  • Open the device manager.

Figure : Example of the Device Manager

Device Manager

  • Expand "Network adapters" and let me know what is listed in network adapters.

If the drivers in network adapters do not have a yellow exclamation mark or a question mark then please perform the following steps that can help to fix the wifi issue:

 

First, we have a step by step guide to walk you through the troubleshooting process here: 
Troubleshooting Your Wireless Network and Internet Connection

 

A second option, is to try these steps:
Powercycle the network:
1. Shut down your notebook.
2. Unplug the power to your router.
3. Unplug the power to your modem.
4. Wait at least 45 seconds.
5. Plug in the modem, and wait for it to come back online.
6. Plug in the router, and wait for it to come back online.
7. Turn on your notebook, and test your connection.

Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.

Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.

It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.

 

Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.

If those three steps do not resolve the issue, try this document published by Microsoft for networking issues: Wired and wireless network problems.
You can change the operating system with the drop-down in the upper-right corner of the document.

 

P.S: Welcome to HP Community 😉

 

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.

Riddle_Decipher
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation