• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

Product Name ProLiant DL380 G7
UUID 30303734-3536-5A43-3232-30353038355A
UUID (Logical)     
Product ID  470065-490       
System ROM P67 05/05/2011
Backup System ROM 05/05/2011
Integrated Remote Console .NET    Java  
License Type iLO 3 Standard
iLO Firmware Version 1.26 Aug 26 2011
IP Address 192.168.12.233

 

When I try to install iLO advanced license (Trial) I've get the error (in subject)!

 

[serial number removed for privacy]

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

The problem was wrong date of server.

View solution in original post

16 REPLIES 16
HP Recommended
And when I open the recieved document with iLO serial code I found, that is iLO2 serial code inside, but there is NO iLO3 serial code! Where I can get iLO3 advanced serial trial key?
HP Recommended

The problem was wrong date of server.

HP Recommended

I am experiencing the same problem on 3x DL380 G7 servers where it doesn’t want to allow the trail cd key. Although I could load this key successfully on one of the servers.

 

We have updated the ILO firmware again to v1.28 with no joy.

The time was set right, so we even changed the time so verify if this will have a affect. Still no joy!

 

Rebooted the server several times. Any advice will be appreciated.  

HP Recommended

I have the same problem with an HP ML110 G7 (iLO 3). What do you mean wrong date of server? in the bios ?

 

Thank you

HP Recommended

I have exactly the same problem also on ML110 G7 ilo3 and the date is correct.

HP Recommended

Ok guys, this is ridiculous!

 

I have a DL120 G7 and are experiencing the exact same problem. No matter which license (and when downloaded there is only mention of ILO 2) I enter from the ILO Evaluation License, I got this error.

 

Can someone from HP can, explicitly explain what is the wrong server date resolution, and/or provide a good link for the ILO 3 Advance Evaluation Key!

 

Please!

HP Recommended

any update for this issue from hp geeks i have also the same issue.

HP Recommended
I have ProLiant ML110G7 with iLO 3 and this same issue but date in BIOS is current. Probably problem is newest iLO 3 ver 1.28.
HP Recommended

i have reset the setting for ilo from bios and it is working fine now.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.