How-to Windows 10 install on hp 2560p

[schdrag]

Hi there

In order to install all the necessary drivers for 2560p I followed the guide  http://forum.notebookreview.com/threads/hp-elitebook-2560p-owners-lounge.586353/page-32#post-1020091... and everything works just fine!
Palaryel "I spent a couple of days installing various Windows 10 drivers for all the hardware included in my Elitebook 2560p, eventually got it all working properly. So in order to prevent others from wasting time searching for drivers, here is a list of all the stuff needed. Just search google for SPXXXX.exe (XXXX = number from below). Not all of the below are officially listed as 2560p drivers, but they are what I'm running and theyre working perfectly. Provided links for non-HP stuff as well.

HP 3D DriveGuard SP - SP64144

HP Hotkey Support - SP68201

HP Support Assistant 7 - SP68201

HP Support Assistant 8 - SP74103

HP Universal Camera Driver - SP63913

IDT High-Definition (HD) Audio Driver - SP59291

Intel 82579LM and 82579V Gigabit Ethernet Driver - SP63881

Intel Chipset Installation Utility - SP53918

Intel Management Engine Interface (MEI) Driver - SP64098

Intel Rapid Storage Technology Driver - SP63947

JMicron Media Card Reader Driver - SP64135

Sierra un2430 Mobile Broadband - SP63218 (install this 1st) & SP63221 (install over 63218)

Software for sending receiving SMS/MMS and USSD codes from Windows 10 (works flawlessly with un2430 broadband module, if you have Ericsson hs2340 module USSD might not work):

http://support.black-it.eu/en/products/mobile broadband sms toolkit/index.htm

Validity Fingerpring Sensor info:

This one is a bit trickier, eventually managed to get it working properly on Win10.

0. If you had any other Validity drivers (or biometric sensor drivers at all) installed, uninstall them 1st and reboot

1. Install Dell's Validity495_Win8.1_Fingerprint_Setup_A00_ZPE.exe (http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=4JR6M)

2. Unpack (dont install!) Validity Fingerprint Sensor Driver SP58900

3. Go to Device manager, select sensor and manually install (let me pick device to install -> have disk) driver from (default unpack location) C:\Swsetup\SP58900\Drivers\WBF_003c_DRVSP58900

4. Reboot again

After this Windows Hello and fingerprint login will work normally."

[TheOldMan]

Thanks for the tip.  I am sure someone else is going to try this after you provided the means.

[schdrag]

Usually one would first update the chipset driver with the helf of Intel update tool or in case this does not work, one would try windows 8.1 drivers. So did I, but finally according to the device manager some devices still were not working, so I removed the existing drivers and replaced them by this sequence and it worked.