-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Re: TS-L633M ATA Device Driver Solution Found with Firmware ...

Create an account on the HP Community to personalize your profile and ask a question

06-27-2012 11:39 PM
Busykid508, I have successfully followed your instructions, but I am unable to run the flash because it isn't seeing the drive. That is, when I open the Flasher, the Select Drive window is populated with, "Drive not found". So, when I load the speedpatch.bin file, I get the following message: "This firmware is not compatible with the selected drive."
I would add that in Device Manager, the drive is recognized and appears enabled.
Do you happen to have any suggestions as to what I need to do to get the Flasher to see the drive? Thank you.
07-08-2012 04:00 PM
Oaktree, I purchased and installed a new dvd drive in my HP G60 laptop and got the same 'Code 10' in Device Manager and another non-functioning drive. Upon additional web searching, I found the following fix: http://support.microsoft.com/kb/314060
While this fix references codes OTHER THAN a 'Code 10' error, it nevertheless solved the problem. Initially, I used the MS Fix It tool, but that didn't work. I ended up using the directions for Vista and modified the registry manually. (I reinstalled the original drive before proceeding.) ESPECIALLY, BECAUSE IT INVOLVED THE REGISTRY, I FOLLOWED THE INSTRUCTIONS VERY CAREFULLY.
Upon rebooting, I can finally see my drive in Computer, no more Code 10, and the drive is working like nothing was ever wrong. (Of course, I'll be returning the purchased drive.) Whatever you decide to do, good luck.
07-16-2012 03:23 AM
I have tried but When the Samsung Stand Alone Flasher opens,i click on the on the SEARCH Button and navigate to the file "SN-S083M_SB02_speedpatched.bin" to load it in the Samsung Flash Utility.
ERROR MESSAGE COMES
"Can't find sutiable Drive for F/W"
What to do then??
07-16-2012 11:43 AM
Piraterex, because I kept having the same problem of the Flasher not recognizing the drive, I abandoned this solution. If you read my last entry, I installed a new dvd drive (a different brand), and continued to get the Code 10 error. By continuing to get a Code 10 error with a different drive, I concluded that updating the soft/firmware was not my problem.
Based upon further research, it is my BEST GUESS that one of the Windows updates modified the Registry and created the Code 10 error. Again, even though the Microsoft Support link http://support.microsoft.com/kb/314060 does not mention a Code 10 error, because the symptoms were the same, I tried this solution.
I CAREFULLY followed the instructions for my system (Vista), modifying the Registry by deleting the upper and lower filters in HKEY_LOCAL_MACHINE and that made the drive functional. It has now been a little over a week and the drive continues to function fine.
Using the Microsoft FIX IT tool did not fix the problem. I had to do it manually. Good luck, whatever you do.
11-15-2012 01:58 PM
I appreciate assitance!
I have made it to the TSDNWIN dialog box where the CD drive hardware is identified but I cannot locate the SN-S083M_speedpatch file as .bin. The download from Samsung was an .exe file, thus cannot find a .bin file in a search related to F/W File. Thanks again!
02-18-2013 05:12 AM
hi sir the problem is that i went to the samsungodd.com (the link you put to download the file
SN-S083N SB02.bin
but what i founf was a page with no download link in it
where can i downloads this file from ?
please help!!!!
thx
