-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Windows 10 Code 43 on HD 4600 Display Adapter

Create an account on the HP Community to personalize your profile and ask a question

07-31-2015 08:12 PM
After doing Windows 10 install, the Dispaly Adapter for the Intel HD 4600 reports a code 43 error and the adapter is disabled. Uninstalling and reinstalling the driver (also tried win 10 driver from intel) does not help. How do I fix?
Solved! Go to Solution.
Accepted Solutions
08-03-2015 04:17 PM
I got it working!
When running under win 8.1 I had occassionally used a third monitor via a j5create usb to vga adapter. After giving up on getting the hdmi to work under win 10, I plugged in the j5create adapter to see if it would work. After the automatic install of the j5create driver, voila, the intel HD 4600 driver started working; and it continued working after unplugging the j5create adapter.
07-31-2015 09:08 PM
I have the same problem. My display adapter is AMD Radeon TM 7450. I have try both AMD offical driver and Windows Update driver but it's no working. Code 43 made me so angry and corrupt my work. How can I fix it
07-31-2015 10:37 PM - edited 07-31-2015 10:38 PM
Me too.
Tried Intel's driver updater, tred it in compatabilty mode; nothing works.
HP's update assistant tells me everything's up to date.
So now the laptop screen's the only thng avalable, and that makes me very unhappy.
Very unhappy.
My eyes ain't what they used to be...
HP ENVY 17 Notebook PC
Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz
12GB
System board: 2291 77.26
System BIOS: F.12
Intel(R) HD Graphics 4600
10.18.15.4248 (6/29/2015)
1,792 MB
08-03-2015 01:59 PM
Also the same problem. I have an ENVY TouchSmart m7-j010dx. After installing Windows 10, my second monitor gives a black screen
- Display Settings in the control panel says I only have 1 monitor.
- In Device Manager, the Intel HD 4600 driver has a code 43 error.
- I have tried rebooting and updating the driver without success. (The intel Windows 10 driver for the 4600 refuses to install, saying it hasn’t been validated).
A fix will be greatly appreciated.
08-03-2015 02:48 PM - edited 08-03-2015 03:34 PM
Just finished a chat/remote-assistance session with HP.
Apparently there was/is an issue with the driver in Win8.1, and it's not resolved in W10. Upgrading to 10 just makes it apparent.
He says use the W8.1 recovery disk to roll back to W8.1; fix the driver issue (he'll send instructions for that); then re-install W10.
A drag, but at least an answer!
It'll take me a few days to go thru the process, and I'll post results here.
Stay tuned...
08-03-2015 04:17 PM
I got it working!
When running under win 8.1 I had occassionally used a third monitor via a j5create usb to vga adapter. After giving up on getting the hdmi to work under win 10, I plugged in the j5create adapter to see if it would work. After the automatic install of the j5create driver, voila, the intel HD 4600 driver started working; and it continued working after unplugging the j5create adapter.
