-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Windows 10 fresh clean install on HP Compaq 6510b

Create an account on the HP Community to personalize your profile and ask a question

02-02-2016 12:10 AM
Hi I have HP Compaq 6510b(RJ559AV) Laptop with Intel Core 2 Duo CPU, T7100 @1.8GHz,
14inch Screen, 2.49GB RAM and 74.5GB Hard Disk with NTFS File System,
DVD Read Only and CD Read / Write Drive,
Mobile Intel 965 Express Chipset Family Display Adapter but no WDDM Drivers for it.
which is currently running Windows XP Professional Version 2002 Service Pack 3
I want to know will Windows 10 clean fresh install by booting via Windows 10 Setup will work?
Will Windows 10 automatically install WDDM Drivers for the Display Adapter...
Any other issues you know of....
Regards,
Chikubhai
Solved! Go to Solution.
Accepted Solutions
02-04-2016 06:45 PM
Anytime.
Glad to be of assistance.
The T7100 can run a 64 bit operating system. See the instruction set spec below.
http://ark.intel.com/products/29759/Intel-Core2-Duo-Processor-T7100-2M-Cache-1_80-GHz-800-MHz-FSB
You should get decent performance out of a 64 bit operating system if you have at least 4 GB of memory installed.
I have 8 GB in my 6910p because I got it when it was only about $60 for 2 x 4 GB of PC2-6400 memory.
Nowadays that memory is about $100 for a 4 GB chip, so it is too expensive to install.
02-02-2016 07:42 AM
Hi:
I have the HP 6910p notebook which has the same chipset and the T7300 processor.
W10 worked just fine. I had to use some of the W7 drivers to get things to work like the card reader but windows update will install the Intel graphics driver or you can use the one from your notebooks support page or from Intel directly.
I upgraded mine from W7 to W10, but I don't see why a clean install wouldn't work as long as you have the W10 product key to enter.
02-04-2016 05:26 PM
Thanks for the reply I will go ahead buying Windows10 and installing it on Compaq 6510b. But have a confusion regarding the bootable USB or DVD and whether 64-bit work on it.
I have BIOS Version/Date Hewlett-Packard 68DDU Ver. F.15, 15/01/2009
SMBIOS Version 2.4
Processor x86 Family 6 Model 15 Stepping 13 GenuineIntel ~1795 Mhz
System Type X86-based PC
In the System Configuration Option there is a sub-option called Boot Options
And in this Boot Options the following list is present:
F9, F10 and F12 Delay(Sec) [0]
USB Device Detection Delay(Sec) [0]
CD-ROM Boot Enable
Floppy Boot Enable
Internal Network Adapter Boot Enable
Boot Mode PXE
Multi Boot:
Express Boot Popup Delay(Sec) [0]
Boot Order:
Optical Disk Drive First
USB CD-ROM Second
USB Floppy Third
USB Super Disk Fourth
Notebook Hard Drive Fifth
USB Hard Disk Sixth
Network Controller Seventh
I want to know whether the Windows 10 USB Bootable will get detected and will the laptop boot from it to start the clean fresh install of Windows 10?
If not then will the Windows 10 DVD Bootable get detected and will the laptop boot from it to start the clean fresh install of Windows 10?
Also Can a 64-bit Version of Windows 10 be installed on Compaq 6510b?
Regards,
Chikubhai
02-04-2016 05:30 PM - edited 02-04-2016 05:34 PM
You're very welcome.
What processor is installed?
I think all of the processors in that model can run a 64 bit operating system.
Look in the control panel>system and security>system.
It will tell you what processor model your notebook has. It should be a Pentium Txxxx.
My 6910p has an Intel Pentium T7500 2.2 GHz processor and I am running W10 Po x64 on it.
I just clean installed W10 x64 on mine today because I decided to put a SSD in place of the standard hard drive.
I don't know if you can install from a flash drive or not.
I made the 64 bit DVD from the Microsoft Windows download site and booted from that.
02-04-2016 05:57 PM
Thanks again!
The processor is Intel® Core™2 Duo Processor T7100 @ 1.8GHz, 2.49GB Ram
The label on laptop says Intel Centrino Duo And in the System Information it says the following for the processor
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 13 GenuineIntel ~1795 Mhz
and it is running OS Microsoft Windows XP Professional Version 2002 Version 5.1.2600 Service Pack 3 Build 2600
Will I be able to install 64bit windows10 and get satisfactory running speed on my laptop?
Regards,
Chirag
02-04-2016 06:45 PM
Anytime.
Glad to be of assistance.
The T7100 can run a 64 bit operating system. See the instruction set spec below.
http://ark.intel.com/products/29759/Intel-Core2-Duo-Processor-T7100-2M-Cache-1_80-GHz-800-MHz-FSB
You should get decent performance out of a 64 bit operating system if you have at least 4 GB of memory installed.
I have 8 GB in my 6910p because I got it when it was only about $60 for 2 x 4 GB of PC2-6400 memory.
Nowadays that memory is about $100 for a 4 GB chip, so it is too expensive to install.
02-16-2016 12:23 AM
Hi Paul,
I have installed 32 bit Microsoft Windows 10 on HP Compaq 6510b and it working satisfactorily.
As i have only 2.5GB of RAM so i decided to install the 32 bit version instead of the 64 bit version.
Thanks for your guidance it was helpfull.
Regards,
Chirag
07-08-2016 08:49 AM
Hi all,
I do also have a 6510b but unfortunatly does not behave well when trying to install win10 from usb. This usb loads up in other 2 pc but in the 6510b does not go by the win logo. Does not loads up to the instalation prompt for the languahe and keyboard.
Any idea?
Thanks
Ric
