-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Re: Windows chooses wrong Graphics Card driver

Create an account on the HP Community to personalize your profile and ask a question

05-12-2014 09:48 AM
Facts:
I have HP Envy dv6 7200t laptop which I purchased directly from HP.
In the speifications I requested a special graphic card: NVIDIA GeForce GT 630M with 2 GB dedicated ram.
I am using Windows 7 64 bit in English.
Now I didn't have much use for such a graphic card until today - I installed a game and it pointed out my graphic card sucks and the game won't run smoothly on it - it said my graphic card is Intel HD Graphics 4000.
I checked the device manager and found out 2 graphic drivers - for both of the listed graphic cards.
both of them are up-to-date (I made sure about the second one from nvidia control panel, and even reinstalled it just incase)
Assumptions:
I am not much of a hardware expert but I assume I do have 2 graphic card - internal on the motherboard (intel) and external (GeForce) - feel free to correct me if I am wrong.
And if thats the case, somehow Windows chooses to use Intel instead of GeForce.
I also made sure of it by disabling the Intel HD Graphics 4000 from the Device Manager and my screen went black - I guess its safe to assume that indeed the intel driver is the one in use.
Question:
If so far I am making sense then perhaps my question is simple - how do I tell Windows to choose otherwise ?
And if I am mistaken, then probably I am in a deeper hole, what do I do?
Thanks!!
Alex
Solved! Go to Solution.
Accepted Solutions
05-12-2014
12:17 PM
- last edited on
04-20-2016
02:17 PM
by
OscarFuentes
Hi, Alex:
Both GPU's are soldered to the motherboard. There are no graphics "cards" in any current HP consumer notebook.
Please read this guide for how to use switchable graphics with the Intel/Nvidia graphics setup.
http://support.hp.com/us-en/document/c03519217
For the AMD Radeon HD 7620G and an AMD Radeon 8770m, please read this guide for notebooks with dual AMD GPU's:
http://support.hp.com/us-en/document/c03048333
05-12-2014 11:09 AM
I have the same issue though mine's with an AMD Radeon HD 7620G and an AMD Radeon 8770m 1GB respectively. So I'd appreciate any help as well
05-12-2014
12:17 PM
- last edited on
04-20-2016
02:17 PM
by
OscarFuentes
Hi, Alex:
Both GPU's are soldered to the motherboard. There are no graphics "cards" in any current HP consumer notebook.
Please read this guide for how to use switchable graphics with the Intel/Nvidia graphics setup.
http://support.hp.com/us-en/document/c03519217
For the AMD Radeon HD 7620G and an AMD Radeon 8770m, please read this guide for notebooks with dual AMD GPU's:
http://support.hp.com/us-en/document/c03048333
05-13-2014
04:55 PM
- last edited on
03-06-2017
04:06 PM
by
OscarFuentes
So I tried following your link, I had a few issues
- There are no new bios for this laptop (Hp Pavilion 15-2513p)
- Installed systems monitor, but no matter what I do the second GPU is ALWAYS at 0%
