-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Notebooks Archive
- Re: my computer screen goes dark when i plug in the power co...

Create an account on the HP Community to personalize your profile and ask a question

08-07-2015 03:46 AM
I had this problem with my HP 240 and Windows 10 (I had no problems with brightness befor the upgrade).
A funny quirk: the increase/decrease brightness buttons seem to be interchanged, so try pressing the decrease brightness button while your laptop is plugged in and see if that solves it.
08-12-2015 10:40 AM
I'm having pretty much the same problem. When I plug the power cord in, the screen goes dark. The brightness settings aren't backwards though, I've tried that. If my computer is off when I plug it in, then turn it on, it's fine. The screen only goes dark if I plug it it when it's already on...
08-14-2015 04:41 AM
I've had the same issue since I upgraded to W10.
The reverse brightness key works; bizzare.
I guess the question is "What is the permanent fix for this?". I should have to mess around with brightness controls everytime I plug the charger in.
08-17-2015 01:10 PM
Hi,
I have the same problem since I installed the Windows 10 upgrade. I checked the brightness settings on the power plan settings and when plugged in was set on brightest but these controls are working the wrong way on windows 10.
So I only had to turn the brightness down to increase it.
Weird eh!!.
Hope this helps,
Suzukial
08-19-2015 01:31 PM
his solution did work for me but I had to do a couple extra steps as my control panel didn't look like his. Here's the steps I used. fyi, dim options and brightness options are two different items you can adjust.
Go to control panel
in search box type Power Options
Click on power options
In the box that pulls up you will see HP Recommended, if that's the option you have selected, click in the box to the right of that labled change plan settings.
That's where you can adjust brightness options based on when the plug is in or out.
09-03-2015 08:19 AM
Hi all, after updating my dads laptop to Windows 10 we had the same errors as stated on here.
What fixed it for me was using the Intel Driver Utility program and updted the graphics driver. That fixed the dimming issue and the button reversal.
Im guessing the Windows 10 drive is an older version thats not compatible
09-06-2015 09:53 AM
I tried all the answers but none worked. My Dark and Bright buttons are at F2 and F3. The small star shape , which I presume is dark, is at F2. I pressed that and the screen came back on. I tried it a couple more times and it works.
