Voyager 5200 Series: How to pair

[karlaz]

First Time Pairing

The first time you turn on your headset, the pairing process begins.

1. Turn the headset on and then put it on. You'll hear "pairing", and the headset LEDs will flash red and blue.
2. Activate Bluetooth on your phone and set it to search for new devices.

• Phone Settings > Bluetooth > On*

• Android Settings > Bluetooth: On > Scan for devices*

NOTE: * Menus may vary by device.

 3. Select "Poly V5200 Series.

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you will hear "pairing successful" and the headset LEDs will stop flashing.

NOTE: Your headset can pair up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.

Pair to another device 

Please follow the steps below:

1. Turn the headset on and then put it on.

2. Press and hold the Call button until you hear "pairing."

3. While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices.

4. Select "Poly V5200 Series." Once successfully paired, indicator lights will stop and you will hear "pairing successful."

   Reference Video

   https://youtu.be/L-u3SwcJgjs