[FAQ] How can I factory restore a RealPresence Group Series system?

[karlaz]

Please check the Administrator’s Guide for "Performing a Factory Restore on the Poly RealPresence Group System" or a search engine results => here <=. 

You can also follow the next instructions to perform a factory restore on a RealPresence Group Series system:

Perform a Factory Restore of a System

If your RealPresence Group Series system is not functioning correctly, or if you have forgotten the admin password, you can reset it to its factory setting. The restore button pinhole is on the bottom of the RealPresence Group 300, 310, and 500 systems, as shown in the following figure.

The restore button pinhole is on the front of the RealPresence Group 700 system, as shown in the following figure.

Procedure

1. Power off the system.
2. Straighten a paper clip and insert it into the pinhole.
3. Using the paper clip, press and hold the restore button.
4. While continuing to hold the restore button, press the power button once.
5. Keep holding the restore button for 10 more seconds, then release it.

During the factory restore process, the system displays the Polycom startup screen and the usual software update screens on HDMI monitors. Other types of monitors will be blank. Do not power off the system during the factory restore process. The system restarts automatically when the process is complete.