• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
HP Recommended
HP ENVY 6055e All-in-One Printer
Microsoft Windows 11

I cannot close my paper tray all the way because of what sounds like a sheet of paper that is crumbled/jammed between the space between the back of the tray and the inside of the printer. I have looked inside the printer and do not see any paper or any jam. I would like some advice on how to remove that jammed paper and also how to remove that might give me access to the crumbled paper. Thanks, H. Fox.

1 REPLY 1
HP Recommended

Hi @RetiredFox,

 

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

I see that you are facing an issue with your printer that has a paper jam.

A) Please follow the steps below to perform a power drain.

 

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

 

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

 

C) Refer to the steps on this video link to further troubleshoot.

 

D) If the issue still persists, refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

I hope this helps.

Take care and have a good day

 

Irwin6

HP Support

Irwin6
I am an HP Employee

If you found this post helpful, you can let others know by clicking the Accept as Solution button. You can also show your appreciation, with a kudos, by clicking the Thumbs up" button!

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.