Re hp envy 7100 paper tray component that I cannot reinsert. Goes in main body per you but how.

[Mary5621]

iOS 81.5. Hp envy photo all in one  7100 Can’t reinsert printer feeder part

[Garp_senchau]

@Mary5621, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

If you're having trouble reinserting the printer feeder part on the HP ENVY Photo 7100 All-in-One printer, here are some suggestions that may help:

Reinsert the Printer Feeder Part

Ensure Proper Alignment: Make sure the printer and the feeder part are aligned correctly. Sometimes parts can be slightly misaligned, preventing proper reinsertion.

Check for Obstructions: Inspect the area where the feeder part goes for any obstructions or debris that might be blocking it from being reinserted.

Try Another Angle: Sometimes tilting the printer slightly (about 60°) can help you access the base of the printer better and reinsert the feeder correctly.

Verify the Orientation: Ensure the feeder is oriented in the correct way before trying to reinsert it. Look for any guides or markings that may indicate the correct direction.

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,