• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
HP Recommended
HP Officejet pro 9010
Microsoft Windows 10 (32-bit)

Top of page is cut off.  Paper not loading correctly?

1 REPLY 1
HP Recommended

@Jenifer12

 

Welcome to the HP support community.

 

Follow these steps to fix the issue.

Clean the paper pick rollers

  1. Get a flashlight.

  2. Turn off the printer.

  3. Wait until the printer is idle and silent, and then disconnect the power cord and any cables from the rear of the printer.

  4. Remove the paper stack from the input tray.

  5. Depending on your printer model, use the flashlight to find the paper pick roller.

    PRINTERS WITH THE ROLLER UNDER THE CARTRIDGES

    Printers with the roller located under the cartridges

    PRINTERS WITH THE ROLLER ABOVE THE INPUT TRAY

    Rollers in the paper tray area
  6. Lightly dampen a cotton swab with water, and then squeeze it to remove any excess water.

  7. Clean the rollers with the swab, rotating the rollers with your fingers to completely clean them.

  8. Allow the rollers to dry for two minutes.

  9. Reconnect the power cord and cables, and then turn on the printer.

Reset the printer

  1. If your printer has a rechargeable battery, remove it.

  2. With the printer turned on, disconnect the power cord from the printer.

  3. Unplug the power cord from the power source.

  4. Wait 60 seconds.

  5. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  6. Turn on the printer to complete the reset.

You can refer to this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.