how to stop multiple paper feed when printing with Envy Pro 6400

[PCA2]

new printer;  tech challenged senior.

everythg works except:

1)multiple feeding paper issue when printing

2)unable to employ multiple page icon request to print more sheet  one @ a time.

any assist is appreciated. 

thx!    🙂

[sandytechy20]

@PCA2

Welcome to the HP support community.

Clean the ADF rollers and the separator pad

Dust inside the automatic document feeder (ADF) can result in paper feed issues.

1. Get a lint-free cloth and distilled water.

2. Remove the original document from the ADF.

3. Turn off the printer.

4. Disconnect the power cord from the rear of the printer.

5. Open the ADF cover.

   

6. Find the paper pick rollers and the separator pad inside the ADF.

   

   1.Paper pick roller

   2.Separator pad

7. Lightly dampen a clean, lint-free cloth with filtered or distilled water, and then squeeze any excess liquid from the cloth.

8. Use the damp cloth to clean the paper pick rollers and the separator pad.

9. Leave the ADF cover open for two minutes to allow the rollers and pad to dry.

10. Close the ADF cover.

11. Reconnect the power cord to the printer, and then turn on the printer.

12. Slide in the paper width guides until they rest against the sides of the paper.

13. Try to scan or copy with the ADF.

Reset the printer

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

5. Turn on the printer to complete the reset.

You can refer this HP document for more assistance:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.