-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Paper Jams & Feed Issues
- laserjet cp1025nw freezes

Create an account on the HP Community to personalize your profile and ask a question
05-13-2022
02:39 PM
- last edited on
05-13-2022
02:54 PM
by
MayS
laserjet model CP1025NW will pull a sheet of paper forward a few inches then stop. Sometimes it will print an inch or so which smears. When the printer does print, it does a beautiful job.
Any suggestions? Is this a mechanical failure, a cleaning problelm or what?
The problem is progressively more frequent.
[Personal Information Removed]
05-15-2022 12:46 PM
If the feed mechanism seems to make multiple rotations when picking paper it may be that the pickup roller in the printer is dirty or worn and needs to be replaced. If the roller appears to be in good shape I would check closely to ensure that nothing is stuck in the paper path that is impeding the movement of paper.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
05-18-2022 03:28 PM
I did a thorough cleaning of the inside of the machine (maybe too thorough). I cleaned the pickup roller, the secondary roller through the rear door and the inside of the machine. When I replaced the yellow cartridge some time ago toner spilled all over the inside of the machine. I replaced that cartridge with a new one. So I tried to clean up as much as I could get at. Also I manually rotated the toner belt (the wide belt -width of the machine) I rotated the belt and cleaned off all the black residue. The belt was in fine shape. Now the machine will not start. It cycles through the lights and stops at a blinking triangle. Every few minutes i hear the machine trying to start - it makes clicking noises.
Any suggestions?