manual printing

[Macntia]

How do I manually feed print media? I am trying to print a note card, but it gets stuck and does not print.

[Garp_senchau]

@Macntia, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

Check Media Compatibility

Your note card should be within these specs:

Media sizes supported

A4, A5, A6, B5(JIS), Card (A4, Hagaki, Ofuku Hagaki); Photo (13 x 18 cm, 10 x 15 cm); Envelope (A2, C5, C6, DL. Chou #3, Chou #4); 8.5 x 13 in

Media weights, recommended

60 to 105 g/m² (plain); 220 to 280 g/m² (photo); 75 to 90 g/m² (envelope); 163 to 200 g/m² (card)

Note: Very thick or glossy card stock may jam the printer.

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,