ошибка установки драйвера на принтер HP LaserJet Pro MFP M125ra

[Alex917]

устанавливал драйвера на принтер HP LaserJet Pro MFP M125ra, когда установка достигла 99% появилась ошибка:
операция установки выполнялась слишком долго. Это фатальная ошибка не позволяет использовать продукт, перезагрузите компьютер и повторно запустите программу установки. Если неполадка не будет устранена попробуйте найти способ её устранения на вэб сайте поддержки устройства.
перезагрузка не помогла, в конце установки опять появилась эта ошибка

[danny-r]

@Alex917

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To ensure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Fórum dos usuários HP
Chinese: 惠普个人客户支持论坛
Korean: HP 지식커뮤니티

Thank you for your understanding.

[Alex917]

installed the driver on printer HP LaserJet professional MFP M125ra when installing docile 99% of the error occurred:
the installation operation took too long. This Fatal error prevents you from using the product, restart the computer, and then run Power setup. If nepad does not strain try to find a way to fix it on the device support website.
reboot not floor, at the end of the installation appeared again this error

[KrazyToad]

Hi @Alex917

Welcome to HP Forums. This is a great place to get support, find answers and tips.

I understand that you are unable to install the drivers for your HP LaserJet professional MFP M125ra

I could help

Let's start with a Printer Reset.

(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
 NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Then uninstall the Printer Driver from Root level

1.) In Windows, search for and open Programs and features 
2.) Select your HP Printer 
3.) Select Uninstall 
4.) In Windows, search for and open Devices and printers 
5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.) Open up the run command with the “Windows key + R” key combo. 
7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.) Click on the “Drivers” tab 
9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.) Select Ok 
11.) Select Apply and Ok on the Print Server Properties windows 
12.) Close Devices and Printers

13.) Restart the computer and download the Full Feature Software from Here and follow the onscreen Instructions

Let me know how it goes.

Thank you. 🙂

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" and "Kudos" Buttons.