-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- 9730e printing borderless and as a booklet

Create an account on the HP Community to personalize your profile and ask a question
09-03-2025 06:16 PM
I just purchased the hp OfficeJet Pro 9730e. I have an 8.5x11 pdf file that is 16 pages. I'm trying to print that as a booklet on 11x17 paper. I can't figure out the settings to keep it from printing 4 pages on 1 side of the 17x11. I only want two pages per side so that it folds in half to an 8.5x11 finished product. I've tried all the settings I can find. Also, I can't figure out how to print borderless. Everything I've read says it will print borderless on 17x11 paper and as a pdf file. Any suggestions?
Solved! Go to Solution.
Accepted Solutions
09-04-2025 09:29 AM
Welcome to the HP Community --
The specifications indicate that A3 paper is supported for automatic duplex (2-sided) printing.
| A3 size | 297 x 420 mm | 11.7 x 16.5 in |
| Duplex Print Options | Automatic |
| Standard Media Sizes (duplex, Imperial) | Legal, Letter; executive, Ledger |
| Standard Media Sizes (duplex, metric) | A4; B5; A3 |
Borderless is supported, though perhaps not as a Document --
| Borderless Printing | Yes (up to A3/11 x 17-in) |
=======================================
Load Paper / Load Media
Load the paper as instructed in the User Guide
Review
User Guide - HP OfficeJet Pro 9730e Wide Format All-in-One Series
Starting on Page 13
Do not skip Step 9
=======================================
EWS - Tray and Paper
Review
User Guide - HP OfficeJet Pro 9730e Wide Format All-in-One Series
Open the embedded web server (EWS) Starting on Page 26
Examples - Tray and Paper
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Reminder
If asked enter the printer’s PIN number –
The default PIN might be located on the back or inside the printer (ink access area).
EWS – Tray and Paper Management
Original EWS - InkJet Printers
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Tab Settings > Preferences > Tray and Paper (Management)
Select / Adjust settings for Paper Size / Type
Model and EWS version Dependent: Advanced section
Click Apply to save changes
EWS_Tray_and_Paper_DeskJet_3
OR
Alternate EWS format - Select new InkJet printers and select LaserJet printers
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Section Paper > Trays > click on Tray to configure
Next (as available)
Section Print > Default Print Options > Select default options / tray
EWS_9135_Tray_and_Paper_9
EWS_9135_Print_Default_Print_Options_9
=======================================
Job Configuration
I don't see where you told us your Operating System / version or the software / application you are trying to use.
The following is relevant to supported versions Windows
HP Smart Printing queue and the HP Smart Universal Printing Driver both support Booklet printing.
NOTE
If the Borderless setting is compatible with the other settings, you will be able to add it in the HP Smart Printing settings when you are configuring the job for Booklet printing.
HP Smart Printing / HP Smart Universal Print Driver - Booklet Printing
Standard Example - Adobe Reader - using HP Smart Printing queue -
1) Open PDF file in Adobe Reader
2) Select Print icon
3) Select Printer as "HP Smart Printing"
4) Select Properties
Properties open HP Smart Printing job settings
5) Orientation = Portrait
Binding / Gutter = Left
Standard Paper size = Letter (could be A4)
Optional - Select other options
For example, Watermark and / or Scale / Resize
6) Select OK to save changes and return to main print menu
7) Select Print to issue the print command
If asked, issue Print again or select a different printer if offered
Result = 1/2 Fold "booklet" - Left to right reading
Folded, the booklet is taller than wide
Example - HP Smart Printing - Booklet Print
PDF_Reader_HP_Smart_Printing_Booklet_3
What else?
Adobe Reader -- even without the HP Smart Printing queue -- can print in Booklet format.
It might be required that you have (previously) installed the full driver printer software.
===================================
Message Content References
Printer - Media Specifications
| Media Handling, Document Finishing | Sheetfed |
| Media Size (facet) | Letter; A4; Legal; B5; Tabloid; A3 |
| Media Sizes Custom (imperial) | Tray 1: 3 x 5 to 11.7 x 17 in; Tray 2: 8.5 x 11 to 11.7 x 17 in |
| Media Sizes Custom (metric) | Tray 1: 76 x 127 to 297 x 420 mm; Tray 2: 210 x 297 to 297 x 420 mm |
| Media Types | Plain; HP EcoFFICIENT; HP Premium Presentation Matte 120g; HP Tri-fold Brochure Glossy 180g; HP Brochure Matte 180g; HP Brochure Glossy 180g; HP Advanced Photo Papers; Light 60-74g |
| Media Weight Recommended (imperial) | 16 to 28 lb, bond |
| Media Weight Recommended (metric) | 60 to 105 g/m² |
| Media Weights Supported, By Paper Path (Imperial) | 9 to 66 lb bond (plain media) |
| Media Weights Supported, By Paper Path (metric) | 34 to 250 g/m² |
------------------------------------------------------
Software and Drivers - OS / version set to Windows 11
Software and Drivers for HP OfficeJet Pro 9730e Wide Format All-in-One series
"Open all" to expand the driver list
------------------------------------------------------
Select and install one of the HP Smart Universal Printing Driver packages as appropriate
Restart the computer and log in.
Full Driver - Web Pack Installation - Web Page
=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=
References / Resources
HP Printer Home Page - References and Resources
Learn about your Printer - Solve Problems
“Things that are your printer”
When the website support page opens, Select (as available) a Category > Topic > Subtopic
NOTE: Content depends on device type and Operating System
Categories: Warranty Check, Alerts, Troubleshooting, Ink & Paper, HP Software & Drivers / Firmware Updates, Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair
Open
Enter the device type and model name of your HP product
OR
Select a saved product from HP Account Dashboard
OR
Thank you for participating in the HP Community --
Real people who own, use, and support HP devices.
Click Yes to say Thank You for the help !
Question / Concern Answered, Click my Post "Accept as Solution"
09-04-2025 09:29 AM
Welcome to the HP Community --
The specifications indicate that A3 paper is supported for automatic duplex (2-sided) printing.
| A3 size | 297 x 420 mm | 11.7 x 16.5 in |
| Duplex Print Options | Automatic |
| Standard Media Sizes (duplex, Imperial) | Legal, Letter; executive, Ledger |
| Standard Media Sizes (duplex, metric) | A4; B5; A3 |
Borderless is supported, though perhaps not as a Document --
| Borderless Printing | Yes (up to A3/11 x 17-in) |
=======================================
Load Paper / Load Media
Load the paper as instructed in the User Guide
Review
User Guide - HP OfficeJet Pro 9730e Wide Format All-in-One Series
Starting on Page 13
Do not skip Step 9
=======================================
EWS - Tray and Paper
Review
User Guide - HP OfficeJet Pro 9730e Wide Format All-in-One Series
Open the embedded web server (EWS) Starting on Page 26
Examples - Tray and Paper
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Reminder
If asked enter the printer’s PIN number –
The default PIN might be located on the back or inside the printer (ink access area).
EWS – Tray and Paper Management
Original EWS - InkJet Printers
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Tab Settings > Preferences > Tray and Paper (Management)
Select / Adjust settings for Paper Size / Type
Model and EWS version Dependent: Advanced section
Click Apply to save changes
EWS_Tray_and_Paper_DeskJet_3
OR
Alternate EWS format - Select new InkJet printers and select LaserJet printers
Open your Browser > Type / enter the Printer IP address into URL / Address bar
Section Paper > Trays > click on Tray to configure
Next (as available)
Section Print > Default Print Options > Select default options / tray
EWS_9135_Tray_and_Paper_9
EWS_9135_Print_Default_Print_Options_9
=======================================
Job Configuration
I don't see where you told us your Operating System / version or the software / application you are trying to use.
The following is relevant to supported versions Windows
HP Smart Printing queue and the HP Smart Universal Printing Driver both support Booklet printing.
NOTE
If the Borderless setting is compatible with the other settings, you will be able to add it in the HP Smart Printing settings when you are configuring the job for Booklet printing.
HP Smart Printing / HP Smart Universal Print Driver - Booklet Printing
Standard Example - Adobe Reader - using HP Smart Printing queue -
1) Open PDF file in Adobe Reader
2) Select Print icon
3) Select Printer as "HP Smart Printing"
4) Select Properties
Properties open HP Smart Printing job settings
5) Orientation = Portrait
Binding / Gutter = Left
Standard Paper size = Letter (could be A4)
Optional - Select other options
For example, Watermark and / or Scale / Resize
6) Select OK to save changes and return to main print menu
7) Select Print to issue the print command
If asked, issue Print again or select a different printer if offered
Result = 1/2 Fold "booklet" - Left to right reading
Folded, the booklet is taller than wide
Example - HP Smart Printing - Booklet Print
PDF_Reader_HP_Smart_Printing_Booklet_3
What else?
Adobe Reader -- even without the HP Smart Printing queue -- can print in Booklet format.
It might be required that you have (previously) installed the full driver printer software.
===================================
Message Content References
Printer - Media Specifications
| Media Handling, Document Finishing | Sheetfed |
| Media Size (facet) | Letter; A4; Legal; B5; Tabloid; A3 |
| Media Sizes Custom (imperial) | Tray 1: 3 x 5 to 11.7 x 17 in; Tray 2: 8.5 x 11 to 11.7 x 17 in |
| Media Sizes Custom (metric) | Tray 1: 76 x 127 to 297 x 420 mm; Tray 2: 210 x 297 to 297 x 420 mm |
| Media Types | Plain; HP EcoFFICIENT; HP Premium Presentation Matte 120g; HP Tri-fold Brochure Glossy 180g; HP Brochure Matte 180g; HP Brochure Glossy 180g; HP Advanced Photo Papers; Light 60-74g |
| Media Weight Recommended (imperial) | 16 to 28 lb, bond |
| Media Weight Recommended (metric) | 60 to 105 g/m² |
| Media Weights Supported, By Paper Path (Imperial) | 9 to 66 lb bond (plain media) |
| Media Weights Supported, By Paper Path (metric) | 34 to 250 g/m² |
------------------------------------------------------
Software and Drivers - OS / version set to Windows 11
Software and Drivers for HP OfficeJet Pro 9730e Wide Format All-in-One series
"Open all" to expand the driver list
------------------------------------------------------
Select and install one of the HP Smart Universal Printing Driver packages as appropriate
Restart the computer and log in.
Full Driver - Web Pack Installation - Web Page
=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=
References / Resources
HP Printer Home Page - References and Resources
Learn about your Printer - Solve Problems
“Things that are your printer”
When the website support page opens, Select (as available) a Category > Topic > Subtopic
NOTE: Content depends on device type and Operating System
Categories: Warranty Check, Alerts, Troubleshooting, Ink & Paper, HP Software & Drivers / Firmware Updates, Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair
Open
Enter the device type and model name of your HP product
OR
Select a saved product from HP Account Dashboard
OR
Thank you for participating in the HP Community --
Real people who own, use, and support HP devices.
Click Yes to say Thank You for the help !
Question / Concern Answered, Click my Post "Accept as Solution"