Cannot install HP LaserJet M1132 MFP.

[Vajďo]

My printer is HP LaserJet M1132 MFP. I have tried tried all types of drivers  but none is working. I have followed all instructions but it is not working.
Every time I install the driver i see this error:
The printer installation failed. Please try the following steps after you click Close.

1. Ensure the USB cable is disconnected from the printer.
2. Turn the printer off, then on.
3. Plug the USB cable into the printer.

[Andr-1611]

Hello @Vajďo ,
Welcome to the HP Support Community!

Here's what you need to do:

1. Disconnect printer/scanner from computer- Disable WLAN, WiFi and/or remove the USB or LAN cable.- Do not switch off the printer >> unplug the power cord from the socket!
2. Uninstall HP printer software, and then remove the printer from your Devices list. 
3. Restart the PC
4. Close all programs
5. download only this complete package: HP LaserJet Full Feature Software and Driver 
   File name: HP_M1130_M1210_MFP_Full_Solution-v20180815-10158769_1.exe (240.8 MB)
6. Close all programs
7. Reconnect the printer only to the power supply and switch it on (if this does not happen automatically)
   Do not connect the printer to the computer!
8. Open up the run command with the "Windows Key + R" key combo > in folder Downloads double-click on the HP_M1130_M1210_MFP_Full_Solution-v20180815-10158769_1.exe
   Via USB, means wait until the installation asks to connect the printer/scanner.
9. The installation was completed successfully, now you must ...
10. Restart the System again
11. Now the installation is complete.

Document error messages accurately, even better is to take a screenshot of it and upload here.

Hope this helps! Keep me posted.
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.

[Sreenivasulu77]

Thank you . You  helped me a lot.

[Andr-1611]

You’re much welcome, great to hear that the problem has been resolved!
Kind Regards
Andr-1611
If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.

[Vajďo]

Hi,

Thank you. But it is not working for me.

See the printscreen

  

[Andr-1611]

Hi,

---

@Vajďo wrote Apr-03-2023 02:11 PM:

Every time I install the driver i see this error:
The printer installation failed. Please try the following steps after you click Close.

1. Ensure the USB cable is disconnected from the printer.
2. Turn the printer off, then on.
3. Plug the USB cable into the printer.

---

Nothing has changed!

I think we are dealing with a defective operating system or another software application is causing the problem!
Therefore apply this solution here.