Changing the administrator password

[frankdarwin]

Hello,
How can I change the administrator password for my MFP 3302 printer?

Frank

[Kuroi_Kenshi · Accepted solution]

Hi @frankdarwin,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding printer's admin password!  

We're thrilled to have the opportunity to assist you and provide a solution.

To change the administrator password for your HP LaserJet MFP 3302 printer, follow these steps:

Through the Embedded Web Server (EWS)

 Find the Printer's IP Address

• On the printer, press the Settings or Wireless button.
• Navigate to Network Setup > View IP Address (write it down).

Access the Embedded Web Server (EWS)

• Open a web browser on your computer.
• Type the printer’s IP address in the address bar (e.g., http://192.168.1.100).
• Press Enter to open the HP EWS page.

Log In as Administrator

• Click Sign In (usually in the top right).
• If prompted, enter the current admin username and password (default username: admin, password may be blank).

Change the Admin Password

• Navigate to Security > Administrator Settings.
• Find the Password section.
• Enter a new password, confirm it, and save changes.

Using HP Smart or Printer Software

Open HP Smart or HP Printer Assistant on your PC.
Go to Advanced Settings > Security.
Change the admin password from there.

you may need to reset the printer to factory defaults:
On the printer control panel, go to Setup > Restore Defaults.
Choose Restore Network Settings or Reset All Settings.
This will remove the admin password, allowing you to set a new one.

Let me know if you need more help. 😊💙

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?"—your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,