Error Code 0X89E60250

[Cindykw]

What is the above error code?

[Raj1788]

@Cindykw

Welcome to HP Forums, 

This is a great place to get support, find answers and tips to your technical queries.

To provide you with an accurate solution, I'll need a few more details:

Are you using genuine HP Ink cartridge?

Is the carriage moving freely?

I suggest you do a Hard Reset

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Update the firmware for the printer using this link: https://support.hp.com/us-en/product/hp-officejet-5200-all-in-one-printer-series/14095737/model/1409...

Keep me posted, how it goes!

Have a great day!

Cheers:)

[GENEO1]

I unplugged it and is now working but it does the every now and then. Not sure 

if it's the same code or not. This is a home printer not used very much never turn off unless the power goes out. Thanks