Error Ebs00p0013

[Mooyahman]

Error code Ebs00p0013 at the end of the setup process after a factory reset on a printer that was working fine yesterday then stopped

[Rachel571 · Accepted solution]

Hi @Mooyahman 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

The error code Ebs00p0013 typically points to a network setup issue or a communication problem during the printer's initialization, particularly after a factory reset. Since the printer was working fine yesterday and stopped afterward, it suggests something went wrong during the setup or the network connection. Here's how to troubleshoot this error:

1. Check the Network Connection

Verify Printer's Network Settings:

• After the factory reset, the printer needs to reconnect to the network. The error could occur if the printer cannot find or connect to your Wi-Fi network properly.
• Recheck the network settings: Go to the printer's Network Settings or Wi-Fi Setup option (on the printer’s screen or web interface) and make sure it's connected to the right Wi-Fi network.
• If using Wi-Fi, ensure that the SSID (network name) is correct and that the password is entered correctly.

Restart Your Router:

• Sometimes the issue can be with the router, especially after a reset. Restart your router by turning it off for 30 seconds and turning it back on to clear any temporary issues.

Check Printer’s IP Address:

• Ensure that the printer has been assigned a valid IP address on your network. You can print a Network Configuration Report (usually available in the printer's menu under network settings) to check this.
• Make sure the printer is not using an outdated IP address or an IP that might conflict with another device.

2. Re-Setup the Printer

Re-run the Setup Process:

• If the printer is still displaying the error after the factory reset, try starting the setup process again. Follow the steps carefully to ensure the printer is connected to your network:
  1. Turn the printer off and wait 30 seconds.
  2. Turn the printer back on and go through the setup process again, making sure to select the correct Wi-Fi network.

Use HP Smart App (if applicable):

• If you’re using an HP printer, use the HP Smart app on your phone or computer. The app guides you through the setup process, and can sometimes resolve network setup issues better than using the printer’s screen or control panel.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support

[Mooyahman]

I tried all of the reset instructions multiple times. What I figured out was to delete the HP Printer app from my iphone and re-install it and the printer. That worked.

[Alden4]

Hi @Mooyahman,

Thank you for your response, 

Is there anything else that I can help you with today?

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Take care and have a great day ahead!

Alden4

HP Support 

[Michael99991]

I was installing a new Smart Tank 6001 (series 6000) using the HP Smart App and got the esb00P0013 error. 
The printer was working from my iPhone and Mac. 

It had an IP address but the installation  process using HP Smart app would not complete. 

i uninstalled the HP Smart app and reinstalled and then choose install printer already on network and the installation finished. You will need the PIN which is inside the printer next to the serial number. 
it registered the printer and finished the installation 

thank you for the recommendation.