HP 7306 Smart tank won't print in colour?

[ingenious99]

Just setup a New 7300 HP smart tank printer but can't print in colour?

Defaults to greyscale BUT can't see a button anywhere to switch to colour ??

Any suggestions please,

Simon.

[Bernard42]

                                    Hello ingenious99,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

Check ink levels and fill ink tanks

Low ink levels can impact print quality. Refill any tanks that are low on ink.

HP recommends that you use genuine HP ink. HP cannot guarantee the quality or reliability of non-HP ink. If you do not use genuine HP ink and HP printheads, the steps in this document might not resolve print quality issues.

Note:

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

1. On the control panel, look for KYMC and the blinking Ink icons

   . The Printhead icons

   might also blink.

2. Fill any tanks that are low on ink.

Check the paper, print settings, and quality of the file being printed

Make sure your print job is set up for optimal print quality results.

1. Check the paper type and condition: Make sure the paper is appropriate for the print job and in good condition.

   • Some paper might not absorb ink as well as others, causing faded or smeared prints. Plain paper with ColorLok technology works well for text and documents with graphics. For photos, use HP Advanced Photo Paper for best results.

   • Use clean, wrinkle-free paper. Wrinkled or curled paper can cause dark, horizontal defects.

2. Load paper according to the print side: Typically, the smoother or glossy side is the print side.

   • For inkjet printers with a rear load tray, load the print side facing up.

   • For inkjet printers with a front load tray, load the print side facing down.

3. Check the print job settings: From the application you are printing from, click File > Print, and then click Options, Printer Setup, or Preferences, or open the Paper Type/Quality or Media & Quality menu.

   Make sure the color, paper type, paper size, and quality settings are correct for your print job.

4. Check the quality of the photo or document: Use editing tools to improve colors, brightness, contrast, and any other appearance settings. Higher resolution photographs and graphics result in clearer prints with more accurate colors.

Clean the ink smears (HP Smart app)

Use the HP Smart app to clean printhead contacts and improve any print quality issues.

1. Open the HP Smart app, and then click the image of your printer to open the settings and management tools.

2. Under Tools, click Alignment & Maintenance.

   If the Alignment & Maintenance is not available, click Advanced Settings to open the printer Embedded Web Server (EWS), and then click Tools. Click Utilities, and then click Print Quality Toolbox.

3. Under Clean Up, click Clean Smear or Clean Ink Smear.

   A Rib Smear cleaning in progress message displays, and the printer feeds one page slowly. The printer might make some noise for a minute before it is done.

Print a Print Quality Diagnostic Page

To resolve many print quality issues, print a Print Quality Diagnostic Page, and then evaluate the results.

1. On the printer control panel, press and hold the Information button

   for five seconds to enable support mode.

   All buttons on the control panel light up.

2. Press and hold the Color Copy button

   for three seconds.

   A Print Quality Diagnostic Page prints.

3. Review the test patterns, checking for missing colors, fading, and white lines.

   • If you find defects on the page, continue to the next step.

   • If you do not find defects on the page, skip to the step to Replace the printheads.

Clean the printhead (HP Smart app)

Use the HP Smart app to clean the printhead and fix many print quality issues including incorrect colors, streaks, and faded printouts.

1. Load plain white paper into the tray.

2. Open the HP Smart app, and then click the image of your printer to open the settings and management tools.

3. Under Tools, click Print Quality Tools, and then select Clean Printhead or Clean.

   A Cleaning printhead message displays, and a test page prints.

   Example of test page printouts

4. Examine the print quality on the test page.

   • If the print quality is acceptable, you are done troubleshooting.

   • If the print quality is unacceptable, touch Yes in the HP Smart app to perform a second-level and third-level cleaning, which are more thorough and take a few extra minutes to complete.

     Note:

     Printheads that are badly clogged might require another printhead cleaning cycle. Wait at least 30 minutes before cleaning the printhead again.

Align the printer (HP Smart app)

Use the HP Smart app to align the printhead, which can improve print quality and resolve alignment errors.

1. Load plain white paper into the tray.

2. Open the HP Smart app, and then click the image of your printer to open the settings and management tools.

3. Under Tools, click Print Quality Tools, and then select Align Printer, Align Printheads, or Align.

   An Aligning printhead message displays and an alignment page prints.

4. If listed on the printout, follow the instructions to scan and finish the alignment process.

   Example alignment page with instructions to scan it with the printer

Replace the printhead

Remove the faulty printhead, and then install the new replacement.

1. Turn on the printer.

2. Lift the ink access door, and then wait until the carriage stops.

3. Press the blue button on the carriage to open the printhead cover.

4. Remove the printhead from the carriage, and then set it aside on a protected surface.

   CAUTION:

   To prevent ink from leaking, hold the printhead by its sides and keep the printhead upright at all times.

5. Remove the new printhead from its package.

6. Pull the plug straight up from the top of the printhead.

7. Remove the tape from the printhead contacts using the pull tabs.

   CAUTION:

   Do not touch the copper-colored contacts or the ink nozzle. Do not replace the protective tape on the contact. Handling these parts can result in clogs, ink failure, and bad electrical connections.

8. Insert the new printhead into its slot until it snaps into place.

9. Close the printhead cover.

10. Close the ink access door.

11. Align the printheads.

    • If your printer has a touchscreen control panel, follow the control panel prompts to print an Alignment page, and then follow the instructions on the page to scan it and align the new printheads.

    • If your printer does not have a touchscreen control panel, an A blinks on the control panel and an Alignment page prints automatically. Follow the instructions on the page to scan it and align the new printheads.

Please click "Accepted Solution" if you think my post solved your problem,

this will help others find the solution.

Click “Congratulations / Thumbs Up” at the bottom right to say “Thank you” for my help!

Take care of yourself and have a good day.

           Regards,

[ingenious99]

Sorry but not addressed the issue?

The printer simply only prints in black, been through every screen / including on-line HP app and can't see if theres a Black only (Draft) button or print in colour button somewhere?? can't find??

Any suggestions please??

Yours

Simon.