-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- HP 7350 photosmart driver for windows 7

Create an account on the HP Community to personalize your profile and ask a question
11-29-2019 02:36 PM
Looking for HP 7350 photosmart driver for windows 7. I went to your HP driver download and there were no drivers. The site suggested using a HP 5550 driver. I downloaded upd-pcl6-x64-6.8.0.24296.exe but that driver does not find my photosmart 7350 usb.
any suggestions?
Solved! Go to Solution.
Accepted Solutions
11-30-2019 03:33 AM
Hi,
The Hp UPD driver have nothing to do with your printer, it is intended for printers who use the PCL6 print language, your printer uses PCL3.
Be sure to follow the steps listed in the document included in my post, if there is no plug & play connectivity when connecting the USB cable, try plugging it to another port at the back of the PC.
If it still doesn’t detect it, try using a new USB cable and check.
Be sure to plug the cable directly, without any USB hub or extension, and use a cable not longer than 1.8 meters long.
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
11-29-2019 03:06 PM
Hi,
Follow below steps to install an alternate driver, by using an HP Deskjet 5550 driver for your printer:
https://support.hp.com/us-en/document/c01796821
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
11-29-2019 03:20 PM
Shlomi,
Thanks but that is the driver I'd tried to install (upd-pcl6-x64-6.8.0.24296.exe)
- I tried installing it as a traditional LPT port but then selected USB.
- I tried installing it as a virtual USB port
Neither install with the above software worked. The 7350 showed "disconnected".
11-30-2019 03:33 AM
Hi,
The Hp UPD driver have nothing to do with your printer, it is intended for printers who use the PCL6 print language, your printer uses PCL3.
Be sure to follow the steps listed in the document included in my post, if there is no plug & play connectivity when connecting the USB cable, try plugging it to another port at the back of the PC.
If it still doesn’t detect it, try using a new USB cable and check.
Be sure to plug the cable directly, without any USB hub or extension, and use a cable not longer than 1.8 meters long.
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
11-30-2019 11:46 AM
It looks like it was the cable. I swapped cables, plug and play did not appear but I was able to manually add a printer. 7350 was not on the win7 list but 7200 was so I selected it. The 7350 responded to this driver.