HP Deskjet Ink Advantage 2545 in error mode

[Kudzanai]

Hie guys. I have my HP Deskjet 2545 Ink Advantage printer in error mode. All lights are blinking and ive tried resetting it with no success. I cant connect to it via USB cable or wifi. Kindly assist. The hardware components ive checked and they seem to be all right.

[Kumar0307]

@Kudzanai, Welcome to the HP Support Community! I’m here to help.

I understand you are not able to use the printer. Let us try these steps to resolve this issue:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Reinsert the ink cartridges. Check if the carriage is moving freely.

Follow the steps from - Carriage jam or E3 error and Attention Light Blinks (Paper Jam)

Kindly refer to - Blinking Lights and follow the steps mentioned. 

Hope this helps! Let me know how it goes. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!