HP ENVY Photo 7931 – Printing problem on Windows 10

[Marus7931]

Hello,

I need assistance with my HP ENVY Photo 7931 All-in-One Printer (7900 series), connected to my Windows 10 64-bit PC.

The printer works correctly from my iPad over Wi-Fi. However, when printing from the Windows PC, it produces multiple pages with only a few random characters instead of the requested document.

Troubleshooting already performed:
- Network connection verified; ping to the printer succeeds.
- Printer detected by HP software, including ink levels.
- Printer IP address: 192.168.100.98.
- HP printer software and drivers removed and reinstalled.
- Official HP Easy Start software installed.
- Standard TCP/IP port checked: RAW, port 9100.
- SNMP monitoring disabled for testing, without success.
- Print processor checked: winprint / RAW.
- Current Windows driver: Microsoft IPP Class Driver.

I suspect a driver or printing-protocol mismatch.

Could you please advise which driver and port configuration should be used for this HP ENVY Photo 7931 on Windows 10, and how to correct the issue without repeating the full installation?

Thank you for your assistance.

[ferRX]

Hi @Marus7931 

Maybe you need to change your current windows driver, if shows "Microsoft IPP driver" that could be the issue.

Please install the Full software driver from the next link:

>> https://ftp.hp.com/pub/softlib/software13/printers/ENP7900/HPEasyStart-17.2.17-EN7900_63_1_4_1_Webpa...

Then restart your computer.

* Click YES   to say thank you, 

* Click Accepted as Solution when question is answered.

ferRX.

[Marus7931]

Hello ferRX,

Thank you very much for your reply and assistance.

I have already downloaded and installed the exact HP full software package you recommended (HPEasyStart-17.2.17-EN7900_63_1_4_1_Webpack.exe).

Unfortunately, the problem persists. Windows 10 still uses the "Microsoft IPP Class Driver", and the printer continues to print multiple pages containing only a few random characters.

Could you please explain how to replace the Microsoft IPP Class Driver with the correct HP ENVY Photo 7900 series driver after installing the full software package?

Thank you again for your help.

[ferRX]

Hi @Marus7931 

Ok, then follow the next steps for changing printer driver.

1. Go to Windows > Settings > Printer & scanners > select your printer

• And select Printer properties
• 

2.  Then select on Advanced tab and click on Driver dropdown

• and change to Envy Photo 7931 driver

• 

3. Then go back to Printers & Scanners

• and click option for Print Test page

• 

* Click Accepted as Solution when question is answered.

ferRX.

[Marus7931]

Hello ferRX,

Thank you for your detailed instructions.

Unfortunately, we have already tried these steps several times.

In the Advanced tab, the HP ENVY Photo 7931 driver does not appear in the driver dropdown list. Only the Microsoft IPP Class Driver and HP Smart Universal Printing drivers are available.

I have already installed the full HP software package you recommended, but the correct driver is still missing.

Could you please explain how to manually install the specific HP ENVY Photo 7900 series driver on Windows 10?

Thank you for your continued assistance.