HP Envy 5052 Firmware install

[labtech1508]

I am trying to update my HP Envy 5052 firmware. I am getting the follwing message:

"The update failed on 1 printer. Please turn the printer off, then on and retry the update".

I have turned it off, turned it back on, tried to reinstall. I have uninstalled the software, then reinstalled it and tried again.

I have restarted my computer and printer.

The printer has the status of verifying on it and keeps running till I hit the X

No matter what I have tried it will not update.

Any suggestions on how to fix this would be appreciated.

[Betty0610]

@labtech1508

Welcome to the HP Support Community.

Let's try to do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Open up the run command with the "Windows key + R" key combo

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer.

Once done, please download and install the software from here:

https://support.hp.com/in-en/drivers

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

You can install the Firmware from here: https://support.hp.com/in-en/document/c02919168

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!