-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- HP Laser 107w Firmware

Create an account on the HP Community to personalize your profile and ask a question
01-11-2024 06:30 AM
Hi,
Was having some problems after updating my firmware on my HP 107w laser printer. I grabbed a copy of the earlier firmware and it seems I was unable to downgrade the firmware.
I found some instructions online on how you can downgrade the firmware using an SPI programmer. I desoldered the flash chip, and sadly managed to snap off one of the legs. (I know, serves me right for messing about)
I have bought a replacement chip (W25Q64JVSSIQ)
and I could do with the correct firmware .bin file for v3.82.01.08 (the previous firmware I was on).
Is there some way somebody can provide me with this binary file so I can fix my printer?
Thank you in advance!
Solved! Go to Solution.
Accepted Solutions
01-15-2024 07:15 AM - edited 01-15-2024 07:15 AM
I managed to sort this out. I found firmware dumps available online and managed to flash this to my replacement chip, resolder it to the board and brought my printer back to life!!
If anybody struggles with something similar in the future then please feel free to PM me and I can point you in the right direction, once you know what you're doing it's really easy.
01-15-2024 07:09 AM
Hi @Nmr94,
Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
Due to limited support, I would request you contact our HP Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link.
Please feel free to contact us here anytime you need any further assistance.
Have a great day!
Alden4
HP Support
HP Support Community Moderator
01-15-2024 07:15 AM - edited 01-15-2024 07:15 AM
I managed to sort this out. I found firmware dumps available online and managed to flash this to my replacement chip, resolder it to the board and brought my printer back to life!!
If anybody struggles with something similar in the future then please feel free to PM me and I can point you in the right direction, once you know what you're doing it's really easy.