HP LaserJet M1530 MFP Error Code 1603

[ELsoghir]

Hi guys, how are you

I have a problem while setup HP printer ( M1536 MFP) MSIEXEC Command.

software: Windows 10 64bit 20H2

[Andr-1611]

Hello @ELsoghir ,
Welcome to the HP Support Community!

In advance, view this solution here: HP M1530_MFP Installaton issue 

Here's what you need to do:

1. Disconnect printer/scanner from computer- remove the USB cable.- Do not switch off the printer >> unplug the power cord from the socket!
2. Uninstall HP printer software, and then remove the printer from your Devices list. 
3. Restart the PC
4. Close all programs
5. download only this complete package: HP LaserJet M1536 Full Feature Software and Driver 
   File name: hp_M1530_MFP_full_Solution_22049.exe (123.8 MB)
6. Close all programs
7. Reconnect the printer to the power supply and switch it on (if this does not happen automatically)
8. Open up the run command with the "Windows Key + R" key combo > in folder Downloads double-click on the hp_M1530_MFP_full_Solution_22049.exe
9. USB, means wait until the installation asks to connect the printer/scanner.
10. The installation was completed successfully, now you must ...
11. Restart the System again
12. Now the installation is complete.

Document error messages accurately, even better is to take a screenshot of it and upload here.

Hope this helps! Keep me posted.
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.