HP OFFICEJET 7510 PRINTER

[MCNLTDOFFICE]

Just today the printer in my office has started to make a grinding/clicking noise whenever I print. I can still print but it doesnt sound right. I've opened it up and had a look and can't really see any problems. I had printed earlier on today and there was no issue and I left something to print when I nipped out and as I came back in I could hear it making those noises.

Any help would be much appreciated.

Thanks!

[Dvortex · Accepted solution]

Hello, @MCNLTDOFFICE – Hope you are well 🙂

Thank you for joining the HP Forums! I read your post about the printer issue and I am happy to look into this issue for you!

I see that the printer is making noisy operation while trying to print. This issue normally happens when the print carriage cannot move freely or the printer is insufficiently powered. I would suggest you reinstall the cartridges and follow the steps mentioned under “Step 4” in this document: http://hp.care/2htjBqQ
 

Once done try performing a hard reset on the printer. Follow the steps below:

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle.

Those steps should do the trick, let me know the outcome!

Cheers 🙂

Please click "Accepted Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!

[MCNLTDOFFICE]

---

@Dvortex wrote:

Hello, @MCNLTDOFFICE – Hope you are well 🙂

Thank you for joining the HP Forums! I read your post about the printer issue and I am happy to look into this issue for you!

I see that the printer is making noisy operation while trying to print. This issue normally happens when the print carriage cannot move freely or the printer is insufficiently powered. I would suggest you reinstall the cartridges and follow the steps mentioned under “Step 4” in this document: http://hp.care/2htjBqQ
 

Once done try performing a hard reset on the printer. Follow the steps below:

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle.

Those steps should do the trick, let me know the outcome!

Cheers 🙂

Please click "Accepted Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!

---

Many thanks for your help, tried the steps as advised and it doesnt seem to making that noise anymore so will see how it goes!

Again thanks for your help 🙂

[liep808]

I am not an HP employer, but has a Officejet 7510 printer, and my advice is get rid of it and buy yourself a new printer, if you can stay away from HP go for something else.

Take my word for it HP will not help you, I talk of experiance.