HP Officejet Pro 8600

[ELM80]

I want to enlarge a document when copying.  This option was available under setting/resize.  The only option available now is the actual size.

[Echo_Lake]

@ELM80

Thank you for posting on the HP Support Community.
 

Don't worry as I'll be glad to help,

To reduce or enlarge copies for the current job

1. On the device control panel, press More Copy Settings.

2. Use the < or the > button to select Reduce/Enlarge, and then press Menu/Enter.

3. Use the < or the > button to select the size to which you would like to reduce or enlarge the copies in this job.

   NOTE: If you select Custom: 25-400%, use the < or the > button to adjust the percentage.

4. Press Start Copy to save the selection and immediately start the copy job, or press Menu/Enter to save the selection without starting the job.

NOTE: The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device control-panel display.
 

You must change the default media size in the media input tray to match the output size, or part of your copy might be cut off.

To adjust the default copy size

NOTE: The default copy size is the size to which copies are normally reduced or enlarged. If you keep the factory default size setting of Original=100%, all copies will be the same size as the original document.

1. On the device control panel, press Menu/Enter.

2. Use the < or the > button to select Copy setup, and then press Menu/Enter.

3. Use the < or the > button to select Def. Reduce/Enlrg, and then press Menu/Enter.

4. Use the < or the > button to select the option for how you normally want to reduce or enlarge copies.

   NOTE: If you select Custom: 25-400%, type in the percentage of the original size that you normally want for copies.
   If you select 2 pages/sheet or 4 pages/sheet, select the orientation (portrait or landscape).

5. Press Menu/Enter to save the selection.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!