-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- HP Smart vs standard Windows drivers

Create an account on the HP Community to personalize your profile and ask a question
02-07-2026 10:31 AM
Recently my Windows 11 PCs have been exhibiting some strange behavior with respect to my HP LaserJet P4015 connected to my home network. I have used this printer for years and it has always worked reliably with Windows until now. I will also note that none of what follows applies to printing from my Mac devices or iPhones. That all has continued to work fine. So, I'm thinking it's not the printer.
After trying a whole bunch of solutions, you name it I probably tried it and spending way more time than I should have; I came to the solution? below. But I'm interested to know if others have seen these behaviors or if there's a pending fix from HP?
Several weeks ago the PCs started showing the printer as OFFLINE (not always at the same time), even though the printer was on and working from other devices The usual fix involved restarting both the PC and printer.
Later, the PC stopped being able to print to the device. What I mean by that is when I selected print from any PC application, including the 'Print Test Page' from the Printer Properties dialog box, the print job would show up in the print queue, act like it was spooling to the printer and then go away. Just like one expects when printing. However, nothing was being sent to the printer. The printer just sat there blindly ignorant of my print request, waiting for a print job, showing "Ready" on its status screen.
At this point, HP Smart could not detect any problems with my print Setup. It told me my printer was properly installed and communicating with my PC. I could even run the "Test Print" successfully and get the printer with the check mark to print, without fail. I just couldn't print from any Windows application.
I tried everything restarting the Print Spooler, clearing files from the Print Spool folder, re-installing drivers and anything I could find on the internet that didn't sound half-way nuts.
What I settled on was this: HP Smart is dumb, at least with respect to my old work horse of a printer.
I removed the printer completely from my system and added the printer using the old Windows installation processes. On one PC, I used the standard Windows driver and on other, I've used the HP Universal Driver (PCL version) download to install the printer. Printing functions now work perfectly fine, like they have for years, since doing that 2 weeks ago. HP Smart, however, will now tell me that I don't have a printer installed.
Comments? Suggestions?
02-07-2026 12:07 PM
Welcome to the HP Community --
I found a review for this printer from July 2008.
If your printer is in this age bracket, the printer is too old to be reliably supported by HP Smart.
-- Dragon Opinion --
You need not dwell on HP Smart --
It's not dumb, but it's certainly at a disadvantage when trying to support this vintage printer.
Use software / drivers that still work.
At this writing --
HP Smart supports many printers from about 2014 to present day.
HP Smart is not listed in the printer's category Software & Drivers for Windows 11
Software and Drivers for HP LaserJet P4015 Printer series
OS / version set to Windows / Windows 11
===================================
Message Content References
-- Take advantage of the extensive HP Video collection --
↓↓↓↓↓↓↓
Technology Tips - Video Gallery from our HP Expert greenturtle
Technology Tips– YouTube Video Help for Printers
HP Support Official Channel – HP Support Video Gallery
=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=
References / Resources
HP Printer Home Page - References and Resources
Learn about your Printer - Solve Problems
“Things that are your printer”
When the website support page opens, Select (as available) a Category > Topic > Subtopic
NOTE: Content depends on device type and Operating System
Categories: Warranty Check, Alerts, Troubleshooting, Ink & Paper, HP Software & Drivers / Firmware Updates, Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair
Open
Enter the device type and model name of your HP product
OR
HP LaserJet P4015 Printer series
Thank you for participating in the HP Community --
Real people who own, use, and support HP devices.
Click Yes to say Thank You for the help !
Question / Concern Answered, Click my Post "Accept as Solution"
02-07-2026 12:57 PM
Sure - OK.
Perfectly possible.
Smiling.
Hopefully, once uninstalled, HP Smart will stay out of the way at least until / if you have hardware that will support it.
Wandering away...
Thank you for participating in the HP Community --
Real people who own, use, and support HP devices.
Click Yes to say Thank You for the help !
Question / Concern Answered, Click my Post "Accept as Solution"