HP Smart will not find computer (5055)

[Funkyecat]

 The only way to install HP5055 on new HP computer through HP Smart, but it will not find it or anything.

[Anand_Andy]

Hi @Funkyecat,

Welcome to the HP Support Community

I understand you are facing an issue with your HP ENVY 5055 All-In-One Printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist you better:

• Is the blue Wi-Fi light solid on the printer? ( if the Wi-Fi Light is blinking then please re-connect the printer back to your Wi-Fi router - Restore Wi-Fi setup mode on your HP printer, Once you restore the network to defaults, then please follow the instructions on this link to connect the printer back to your PC.)
• How far is the printer located from the WiFi router?
• Do you have a dual-band router?
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both networks.

While you respond to that, Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

1)Uninstall HP Smart 

2)Install all the available Windows updates

If it is been a while since you updated your Windows, that is the main reason why Windows says your HP printer driver is unavailable. Here are the steps how to do a Windows Update to install all accessible operating system update.

If you are accessing Windows 10, then these steps are for you.

1. Hit the Start menu and write an update. After that, click on the “Check for updates” option.
2. Tap on the “Check for updates” option.
3. After clicking on that option, Windows will install the updates automatically.
4. When Windows completes all its updates, start your computer again and attempt to print a file to check if your printer works.

3) try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware 

4)Reinstall HP Smart

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!