HP all in one 6970 printer driver not found, need help!

[Dana_360]

I need HP support, which I understand may be for a fee.  How do I speak to someone who can help me?  I have done all the trouble shooting videos and the hp smart on my computer, or an any of the devices, still cannot find the printer driver.

[Kumar0307]

@Dana_360, Welcome to the HP Support Community!

I can help you out with this issue. Let us perform a clean reinstallation of pre-installed HP drivers

Before this, make sure the printer and the computer are connected to the same wireless network/via USB.

1.  In Windows, search for and open Programs and features 
2.  Select your HP Printer 
3.  Select Uninstall 
4.  In Windows, search for and open Devices and printers 
5.  In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 
6.  Open up the run command with the “Windows key + R” key combo. 
7.  Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”) 
8.  Click on the “Drivers” tab 
9.  Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 
10.  Select Ok 
11.  Select Apply and Ok on the Print Server Properties windows 
12.  Close Devices and Printers, restart the computer.

Click here to download the HP Full-featured driver.

Once downloaded, make sure to run the file to start the installation and follow the on-screen instructions.

Try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[Dana_360]

Kuman0307, I followed all the steps you prescribed and at the end the software still says it cannot find the device.   

[Kumar0307]

@Dana_360

• Make sure the printer and the PC are connected to the same wireless network.
• This printer supports 2.4GHz network. So, the PC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

Install the printer using the TCP/IP port:

1. On the PC, go to Control panel > Devices and printers > Add a printer(at the top) 
2. Under 'Choose a device or printer', click on 'The printer I want isn't listed'.
3. Select 'Add a printer using a TCP/IP address'
4. Find the IP address of the printer by tapping on the wireless/ethernet icon on the printer screen
5. Type in the 'IP address in Hostname or IP address' box, click next
6. Proceed to the next steps by following the on-screen instructions.
7. Try printing.

If the issue persists, Install the printer using Windows built-in driver

Refer to this document to know how. Try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!