-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: HP7510 mission SETUP cartridges

Create an account on the HP Community to personalize your profile and ask a question
09-25-2025 08:10 AM
Hi, I run a small furniture bank charity, and we have been donated what seems to be an unused HP 7510 wide format printer that will be very useful. But there is a message saying use SETUP cartridges, but we do not have these and I can not see where they can be obtained. Is there a way around this please.
Thanks !!
Solved! Go to Solution.
Accepted Solutions
09-25-2025 09:32 AM - edited 09-25-2025 09:36 AM
This worked on a 7520 and possible will work on your 7510
230 5055 6055 7120 7520 Remove all paper from the printer
1. On the control panel, touch the Home and Back buttons in this sequence: Home button once>>>>Back button twice>>>>>Home button once 1 Open the ink cartridge access door, and then close it. A Load Paper message displays on the control panel display, and the printer begins initializing. 2. If the initialization does not begin, repeat steps a and b until the initialization begins. 3. Follow the prompts on the control panel display to complete initialization |
-----------------
this might be useful also
let me know if any work!!!
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
09-25-2025 09:32 AM - edited 09-25-2025 09:36 AM
This worked on a 7520 and possible will work on your 7510
230 5055 6055 7120 7520 Remove all paper from the printer
1. On the control panel, touch the Home and Back buttons in this sequence: Home button once>>>>Back button twice>>>>>Home button once 1 Open the ink cartridge access door, and then close it. A Load Paper message displays on the control panel display, and the printer begins initializing. 2. If the initialization does not begin, repeat steps a and b until the initialization begins. 3. Follow the prompts on the control panel display to complete initialization |
-----------------
this might be useful also
let me know if any work!!!
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
09-25-2025 01:16 PM
Many thanks for your response!!
Your second link was the one the information that worked for my 7510...
This option:
- Press the "Back/Return" arrow 4 times (even if it is not lit up)
- This brings you do the "Support Menu"
- Use arrows to scroll to "System Configuration Menu"
- Select "Trade at OOBE"
- Press "OK" to enable
- Press "x" to exit out of menu screen
- Turn off printer and then power back on
thanks again.
09-26-2025 08:10 AM
I updated my list of known systems!!!
Thanks!!!
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it