How do I get my HP printer to print double-sided automatically windows 10

[41cgrove]

How do I get my (new) HP Smart Tank 5106 printer to AUTOMATICALLY print double-sided using windows 10

[Andr-1611]

Hello @41cgrove ,
Welcome to the HP Support Community!

A) Printer settings Duplexer:
Search Windows for 'devices', and then click the Devices and Printers control panel setting in the results.

Right-click the icon for your printer model, and then
click Device Settings tab
Installable Options > Duplexer: installed

If not, change to installed.

B) Automatic Two-Sided Duplex Accessory:

Enter the Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.

Now Automatic Duplexing should become available.

If the Options > Duplexer or Duplex Accessory is not displayed, then download only HP Smart Tank 5100 EasyStart Printer Setup Software - Offline Use Only 

File name: HPEasyStart-15.8.1-ST5100_57_2_1673_1_Webpack.exe (339.4 MB)

1. Uninstall HP printer software, and then remove the printer from your Devices list. 
2. Restart the PC
3. Close all programs
4. Open up the run command with the "Windows Key + R" key combo > in folder Downloads double-click on the EXE
5. The installation was completed successfully, now you must ...
6. Restart the PC again
7. Now the installation is complete.

Document error messages accurately, even better is to take a screenshot of it and upload here.

I hope this helps.

Kind Regards
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.