How to connect ML2525 to wifi or USB

[Olsoncollin]

How do I configure the printer on a google play?Laptop or on my samsung phone

[Meghana_10]

@Olsoncollin, Welcome to the HP Support Community. 

Thanks for reaching out about your query regarding the HP ML2525. 

We're thrilled to have the opportunity to assist you and provide a solution. We hope our assistance has been helpful! 

The Samsung ML-2525 printer can be connected via USB to a computer, but it does not have built-in Wi-Fi capability. To connect your Samsung ML-2525 to a computer, here's how you can do it using a USB connection:

USB Connection

1. Gather Necessary Cables:

   • Ensure you have a USB cable that is compatible with the printer. It typically requires a standard USB A to B printer cable.

2. Install Printer Driver:

   • Before connecting the printer, make sure the necessary drivers are installed on your computer. You can typically find these drivers on the HP Support website or the Samsung website, as HP now owns Samsung's printer division.

3. Connecting the Printer:

   • Connect one end of the USB cable to the USB port on the printer.
   • Connect the other end to the USB port on your computer.

4. Power On the Printer:

   • Turn on the printer. The computer should automatically detect the printer and finalize the driver installation.

5. Verify Printer Installation:

   • Go to your computer’s settings or control panel to ensure that the printer is listed among installed devices.
   • Print a test page to confirm that the setup is successful.

Wi-Fi Connection

The Samsung ML-2525 does not support Wi-Fi connectivity directly. For wireless printing, you might consider using a USB-to-Wi-Fi adapter or hub that can provide network access, but it requires specific additional hardware that supports networking capabilities.

I hope this helps!

Take care and have an amazing day! 

If you would like to thank us for our efforts to help you, go to the public post and give us a virtual high-five by clicking on "Yes" for the question "Was this reply helpful?" below my message, followed by clicking on the "Accept as solution" on my public post.

Regards,

Meghana