-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- How to connect my printer ( hp deskjet 2710 ) to my wireless...

Create an account on the HP Community to personalize your profile and ask a question
09-09-2020 10:20 AM
Hey !
I steuped my hp deskjet 2710 yesterday ( in wifi ) via hp smart. Then i turned it off. Now i need to print something and i can't reconnect the printer to the network, on hp smart, it says "printer is offline"
Do someone know how to connect it to wifi pls ?
Thanks !
Solved! Go to Solution.
Accepted Solutions
09-09-2020 12:08 PM
Hi,
Can you see the Wireless light solid lit or blinking?
If it solid lits, please print and evaluate a Wireless Test Report:
https://support.hp.com/us-en/document/c06543518
Can you see any warning or attention listed on the top of the report?
If it blinks, ensure the printer is ready, the power light solid lits, and the LED list 00.
Press and hold the Wireless and Cancel button s for 3 seconds, till the power list starts blinking, then the wireless light should blink and you should see a nearby network starting with HP-Setup, only verify the network is listed and make sure you are connected to your home wifi.
Open HP Smart and click the plus sign, then click on Add a Printer and follow the steps to set up the printer on your wireless network.
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
09-09-2020 12:08 PM
Hi,
Can you see the Wireless light solid lit or blinking?
If it solid lits, please print and evaluate a Wireless Test Report:
https://support.hp.com/us-en/document/c06543518
Can you see any warning or attention listed on the top of the report?
If it blinks, ensure the printer is ready, the power light solid lits, and the LED list 00.
Press and hold the Wireless and Cancel button s for 3 seconds, till the power list starts blinking, then the wireless light should blink and you should see a nearby network starting with HP-Setup, only verify the network is listed and make sure you are connected to your home wifi.
Open HP Smart and click the plus sign, then click on Add a Printer and follow the steps to set up the printer on your wireless network.
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂