How to perform a factory reset HP Laser 135WG

[EMES89]

Hi Community, 

 i was looking for a solution of how to reset my Laser MFP 135wg and want to refer to the this specific topic: https://h30434.www3.hp.com/t5/Printer-Setup-Software-Drivers/How-to-do-factory-reset-HP-Laser-135WG/... 

I want kindly request to send me the reset instructions, to perform a full reset of my printer.

Thanks in advance,

[Mans · Accepted solution]

@EMES89 

Hello,

HP Laser MFP 135a, 135r, 135w, 135ag, 135wg Firmware File: https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-laser-mfp-130-printer-series/24494378/....

You will need to follow the instructions below to solve this issue:

1. Turn the printer off.
2. Press and hold down the Right Arrow () and the Cancel () buttons.
3. Hold the buttons when you turn on the printer.
4. When the Permanent Storage Init. screen appear, release the Right Arrow () and the Cancel () buttons.
   

   NOTE: It takes about 60 seconds before initialization process begins.
   If the bottom right arrow of the Permanent Storage Init. screen does not appear, repeat steps 1 and 2, but this time press the bottom left arrow.

5. The initialization starts.
6. When the initialization completes, the printer enters the generic printer mode.

Don't hesitate to contact us in case of need.

Best regards,