How to reinsert the ink cartridge tray

[MicheleEsq]

How do I reinsert the ink cartridge tray on an HP Color LaserJet Pro MFP M281fdw?

[Raj_05]

Hi @MicheleEsq,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

Inserting the ink cartridge tray on an HP Color LaserJet Pro MFP M281fdw involves a few simple steps. Here's a general guide; please note that details might slightly vary, so it's a good idea to consult your printer's manual for specific instructions. If you don't have the manual, you can usually find it on the HP website.

Here's a general guide,

• Turn off the Printer: Ensure that your printer is turned off before you begin any maintenance.
• Open the Cartridge Access Door: Lift or open the front cover or cartridge access door of the printer. This is the area where the ink cartridges are housed.
• Remove the Ink Cartridges: If you haven't already removed the ink cartridges, gently take them out one by one. Keep track of their positions, as you'll need to reinsert them in the same order.
• Check the Ink Cartridge Tray: Ensure that the ink cartridge tray is clean and free of any debris. You can use a lint-free cloth to clean it if necessary.
• Reinsert the Ink Cartridge Tray: Carefully slide the ink cartridge tray back into its place. Make sure it fits securely, and you may hear a click when it's in the correct position.
• Reinstall the Ink Cartridges: Place each ink cartridge back into its corresponding slot. Make sure each cartridge is securely seated and that you press it down until it clicks into place.
• Close the Cartridge Access Door: Close the front cover or cartridge access door securely.
• Turn On the Printer: Power on your printer and wait for it to complete its startup process.

After these steps, your ink cartridge tray should be successfully reinserted. If you encounter any issues or if the printer prompts you with messages on the display, refer to the printer manual or any on-screen instructions for troubleshooting.

I hope this helps. 
 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support