How to wirelessly connect MFP178nw

[Lightcap]

HP COLOR LASER MFP 178nw.             Not able to connect it to our wifi...... have gone through its menu 14 times trying

[zoey7886]

@Lightcap, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Connecting the HP Color Laser MFP 178nw to a Wi-Fi Network! 

We're thrilled to have the opportunity to assist you and provide a solution.  

Here’s a comprehensive guide to help wirelessly connect your HP Color Laser MFP 178nw printer to your network:

Using the Wireless Setup Wizard

Preparation:

• Ensure your wireless network is available and the router is powered on.
• Make sure the printer is powered on and ready.

Access Wireless Setup Wizard:

• On the control panel of your printer, press the Wireless button.
• Navigate to Settings and select Wireless Setup Wizard.

Select Your Network:

• The printer will search for available networks. You need to select your network name (SSID) from the list.
• Follow the on-screen prompts to enter your wireless password (WEP key or WPA passphrase) if required.

Install Software:

• After successfully connecting, ensure you have installed the necessary printer software on your computer. This can be found on the HP website (HP Support) if not already installed.

Using Wi-Fi Protected Setup (WPS)

If your router supports WPS, you can connect using this method:

Preparation:

• Ensure your WPS-enabled router is turned on.
• Make sure the printer is powered on and ready.

Push Button Method:

• Press the WPS button on your router.
• Press and hold the Wireless button on the printer for at least 3 seconds.
• The printer should display it is trying to connect.

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,