I have an HP printer and wants to connect remotely to the laptop

[IhabEdouard]

I have an HP printer and wants to connect remotely to the laptop
The printer was connect to a different wifi and Now i can't connect to the new network.

I can't scan or print from the laptop

[zoey7886]

@IhabEdouard, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Connecting HP LaserJet MFP M234sdw Printer to a New Network! 

We're thrilled to have the opportunity to assist you and provide a solution.  

To resolve the issue of connecting your HP LaserJet MFP M234sdw printer to a new network and enabling remote scanning and printing from your laptop, please follow these steps:

Step 1: Restart the Printer

1. Power off the printer: Press the power button to turn off the printer.
2. Wait for a few seconds: Allow the printer to completely shut down.
3. Power on the printer: Press the power button again to turn on the printer.

Step 2: Reset Network Settings

If your printer was connected to a different Wi-Fi network, you need to reset its network settings to connect it to the new Wi-Fi network.

1. Access the control panel: Use the printer’s control panel to navigate to network settings.
2. Reset network settings: Select the option to reset network settings to restore default network configuration.

Step 3: Connect Printer to New Wi-Fi Network

Reconnect the printer to the new Wi-Fi network:

1. On the printer control panel: Navigate to Wi-Fi settings.
2. Select your new Wi-Fi network: Choose the new network from the list.
3. Enter network password: Type in the Wi-Fi password to connect the printer to the new network.

Step 4: Update Printer Settings on Laptop

Update the printer settings on your laptop to reflect the new network configuration:

1. Open HP Smart app: Launch the HP Smart app on your laptop. If not installed, download it from the official HP website.
2. Add a new printer: Select the option to add a new printer.
3. Follow setup wizard: Follow the instructions to detect and add the printer on the new network.
4. Test print and scan: Try printing a document and scanning to ensure the new configuration works.  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,