I have reset my 9010 Officejet printer - reset

[sssx3]

My printer reset. then goes to screen that has my cartridges are not set up ( which they are). i select hide. then it goes to aligment and stays there for hours. i cannot get out of this function. i have tried hitting the back button four times and do reset from there and it doesnt work.

[Irfan_06]

Hi @sssx3,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

I see that you are facing an issue with setting up your printer after resetting it.

A) Please follow the steps below to perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware.

C) Now click on this link to setup your printer again and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day

Irwin6

HP Support