Installation Of HP Printer

[Adibetal]

Printer Laser Jet Pro MFP M128fn

[Raj_05]

Hi @Adibetal,

 Welcome to HP Support Community.
 
Thank you for posting your query, I will be glad to help you.
 

To install your HP LaserJet Pro MFP M128fn printer, you can follow these general steps. This includes setting up the hardware and installing the necessary software and drivers:

Step 1: Unbox and Set Up the Printer

1. Unpack the Printer:

   • Remove the printer from its box and remove all packaging materials, including tapes and protective films.

2. Install the Toner Cartridge:

   • Open the front door and insert the toner cartridge into the printer, ensuring it clicks into place.

3. Load Paper into the Tray:

   • Pull out the paper input tray and adjust the guides to fit the paper size. Insert the paper and adjust the guides snugly against the paper.

4. Connect the Power Cord:

   • Plug the power cord into the printer and then into a wall outlet. Turn on the printer by pressing the power button.

Step 2: Connect the Printer

1. Choose a Connection Type:

   • Depending on your setup, you can connect the printer via USB or Ethernet.

2. USB Connection:

   • Connect a USB cable from the printer to your computer. The printer should be detected automatically, but you will need the HP software for full functionality.

3. Network Connection:

   • Connect an Ethernet cable from the printer to your network router or switch.

Step 3: Install Printer Software and Drivers

1. Download Drivers:

   • Visit HP's Support Website and search for your printer model (HP LaserJet Pro MFP M128fn).

2. Install the Software:

   • Download the full feature software and drivers for your printer.
   • Run the downloaded file and follow the on-screen instructions to install the drivers and software.

3. Complete the Installation:

   • When prompted, select the type of connection (USB or Network) based on how you connected your printer.
   • Follow the remaining prompts to complete the software installation.

Step 4: Test the Printer

• Print a test page to ensure that the printer is set up correctly and functioning.

By following these steps, your HP LaserJet Pro MFP M128fn printer should be installed and ready for use.

I hope this helps.
 
Take care and have a good day.
 
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!