Installing the ink cartridge

[KB2341]

HP DesjJet 2820e

[Max3Aj]

@KB2341, Hello and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

Here's a step-by-step guide to help you install the ink cartridges in your HP DeskJet 2820e All-in-One Printer:

Steps to Install Ink Cartridges:

Power On the Printer
Make sure your printer is turned on. If it's not, press the power button.

Open the Ink Cartridge Access Door
Lift the front access door. The carriage will move to the center automatically. Wait until it stops moving before proceeding.

Remove the New Ink Cartridge from Packaging
Take the cartridge out of its packaging and gently remove the plastic tape.
⚠️ Do not touch the copper-colored contacts or ink nozzles. This can cause clogs or ink failure.

Insert the Cartridge

• Black cartridge goes into the right slot
• Tri-color cartridge goes into the left slot
  Slide the cartridge into its slot at a slight upward angle until it clicks into place.

Close the Access Door
Lower the access door. The printer may prompt you to align the cartridges.

Align the Cartridges (Recommended)
Follow the on-screen instructions or use the HP Smart app to align the cartridges for best print quality.

You may refer to this link - HP DeskJet 2820e All-in-One Printer Setup | HP® Support

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support