Guidelines
We have new content about printers, Click here to check it out!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended

I have HP LaserJet M110we is there a way to only install the driver for Windows 10 and 11 ?

1 REPLY 1
HP Recommended

 

              Hello man00

 

 

 

Welcome to the HP Support Community

I'd like to help!

 

I understand you would like to set up the printer without Wifi 

 

You can set up the printer using USB.

 

Set up a USB printer connection (Windows)

Download the HP Smart app, and then follow the instructions to set up a USB connection in Windows.

If you already connected the printer USB cable to your computer, disconnect it, and then remove the printer from your computer.

Search for and open Printers & scanners, and then select the name of your printer from the list. Click Remove device, click Yes, and then restart the computer.

Make sure an open USB port is available on your computer. Do not connect the printer to a USB hub or docking station as the printer might not receive enough power to operate properly.

Go to HP Smart - Microsoft Store and install the HP Smart app.

Open the app, and then follow the guided installation to complete the setup. If the setup does not begin automatically, click the Plus sign

 

 

to add your printer.

 

An alternate method, Set up a USB printer connected with a built-in driver (Windows)

When you connect the printer USB cable, Windows automatically installs and adds your printer to provide basic printing functionality.

Make sure there is an open USB port available directly on your computer. If you use a USB hub or docking station, the printer might not receive enough power to operate properly.

Connect the printer USB cable to the computer.

If a 'Found new hardware' message displays, follow any prompts to install the driver, and then send a print job to confirm the connection.

If the printer connection or print job fails, continue with these steps.

Search for and open Printers & scanners.

Click Add a printer or scanner.

If your printer is in the list, select it, click Add device, and then follow the prompts to install the driver.

If you printer is not in the list, continue with these steps.

Click The printer that I want isn't listed, and then select Add a local printer or network printer with manual settings.

Click Next, select Use an existing port, select (USB001: Virtual printer port for USB) from the drop-down menu, and then click Next.

If prompted, click Windows Update, and then wait for the print drivers to finish updating.

Under Manufacturer, select HP or Hewlett Packard, and then select the name of your printer.

 

 

Click Next, and then follow the prompts to install the driver.

Disconnect then reconnect the USB cable to complete the printer setup.

 

You may refer to -https://support.hp.com/us-en/document/ish_2026111-1786193-16

 

 

 

 

                                  

                                 Excellent Day.

 

 

             * Click on YES button  to say thanks, 

             * Click on the button Accepted Solution if the question is answered.

             * Please keep me informed.

              * I am a volunteer posting answers on my own time.

 

                  Best regards,

                         

                         

 

 

                                  

Bernard42.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.