MFP M281fdw installation fails

[2kXT4Gvz]

Hello,

with my network everything is fine. With the HP Software something is wrong.

fritz.box

Details für NPICC4CE2

Name: NPICC4CE2

Home network connection

FRITZ!Box 7520 (UI) (Mesh-Master)

IP address: 192.168.178.1

 2,4 GHz - 144 Mbit/s - NPICC4CE2

Addresses in the home network (IP addresses)

Device name in the home network NPICC4CE2

IPv4 address 192.168.178.88

Always assign the same IPv4 address to this network device.

WiFi connection 2,4 GHz

Signal strength -60dBm

max. possible data rate 144 / 144 Mbit/s

current data rate 144 / 130 Mbit/s

WiFi standard Wi-Fi 4

Frequency band 2,4 GHz

Channel bandwidth 20 MHz

Streams 2 x 2

WiFi properties

Encryption WPA2

Signal properties STBC

QoS (Quality of Service) WMM

Repeater operation no

Network communication with the device through the firewall

MFP IP address: 192.168.178.88

Hostname: NPICC4CE2

Ping-Statistics für 192.168.178.88:

packages: sent = 4, received = 4, lost = 0

(0% loss)

Microsoft Windows [Version 6.3.9600]

(c) 2013 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Users\Admin>ping 192.168.178.88

Ping wird ausgeführt für 192.168.178.88 mit 32 Bytes Daten:

Antwort von 192.168.178.88: Bytes=32 Zeit=100ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=24ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=360ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=6ms TTL=255

Ping-Statistik für 192.168.178.88:

Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0

(0% Verlust),

Ca. Zeitangaben in Millisek.:

Minimum = 6ms, Maximum = 360ms, Mittelwert = 122ms

C:\Users\Admin>ping NPICC4CE2

Ping wird ausgeführt für NPICC4CE2.fritz.box [192.168.178.88] mit 32 Bytes Daten:

Antwort von 192.168.178.88: Bytes=32 Zeit=88ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=4ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=4ms TTL=255

Antwort von 192.168.178.88: Bytes=32 Zeit=6ms TTL=255

Ping-Statistik für 192.168.178.88:

Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0

(0% Verlust),

Ca. Zeitangaben in Millisek.:

Minimum = 4ms, Maximum = 88ms, Mittelwert = 25ms

C:\Users\Admin>

MAC address filtering

MAC address filtering is OFF by default on the AVM Router 7520 and I did not turn it on:

fritz.box --> WLAN --> Sicherheit:

Restrict WiFi access

The list shows WLAN devices that are currently connected directly or via WLAN Mesh in the FRITZ!Box home network or devices that are known from previous connections. You can restrict WLAN access to known WLAN devices (MAC address filter).

List not shown for data protection reasons.

SELECTED Allow all new WiFi devices

NOT SELECTED Restrict WiFi access to known WiFi devices (Note: This is MAC address filtering)

Why does my MFP not connect to the WSD?

[2kXT4Gvz · Accepted solution]

It needs to much effort still not to be able to use the HP Software for wirelessly printing AND wirelessly scanning.

My solution for the future: My next MFP will be no HP product.