Memory is low print job cancelled

[WYT]

hi, I am having an issue with my printer it says the memory is low and nothing is printing, can you please help me how to reset the memory?
I've deleted and readded the printer, unplugged it, updated the firmware and nothing is working.

[Kumar0307]

@WYT, Welcome to the HP Support Community!

Kindly perform the steps mentioned in this document to resolve this issue.

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Update the printer firmware

Click here to download and install the latest printer firmware from your MAC.

Click here to know different methods of updating printer firmware.

Also, check for any software updates on MAC

Click the Apple icon > About This Mac > Software Update and install any available update.

If the issue persists, we will have to perform a factory reset on the printer

I have sent you a private message with a set of instructions to perform a reset. Kindly check the same, this might help you to resolve this issue. Check next to your profile name, you should see a little blue envelope, please click on it.  

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!