Officejet 4620

[cabe42se]

After upprading to Mojave and latest printer driver  computer refuses to print. I have run throug the HP instructions and nothing helps. Printing reacts normally except that message "waiting for availabilty of printer" is displayed. Test page is printed correctly and printing works from other computer runnig earlier versions of softwae.

[Kumar0307]

@cabe42se, Welcome to the HP Support Community!

Which application are you trying to print from?

Have you tried printing different types of documents like PDF, Word or Webpages and check if the issue persists?

Check the connectivity between the printer and the MAC

• Make sure the printer and the MAC are connected to the same wireless network.
• This printer supports only 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

Perform a PING test

1. Obtain the IP address of the printer by clicking on the Wireless icon on the printer
2. On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box
3. Check the second box that says Send only > 10 pings
4. Click on ping > Check the results at the end if any packets are lost
5. Note: There should be 0% packet loss, share the results in your next post.
6. If 0% loss, proceed to the next step.

Install the printer using AirPrint driver

Please ensure that the printer is up to date with its firmware and Mac is up to date with its software. If you are unsure you may use the links below to update the printer firmware and Mac software:

Update printer firmware

Update software on Mac 

1.) Click the Apple menu, click System Preferences, and then click Print & Scan or Printers & Scanners.

2.) Check if your printer name displays in the Printers list, If your printer is listed, click the printer name, click the minus sign to delete the printer.

3.) If you see multiple printer queues for the same printer, remove all extra printers by selecting them one at a time, and then clicking the minus button at the bottom of the list.

4.) Click the plus sign, click Add Printer or Scanner, click the printer name.

5.) Click the Use or Print Using menu, select AirPrint in the pop-up menu. Then click Add.

6.) Try to print.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!